4.9/ 5.0
100% pembeli merasa puas
11 rating • 3 ulasan
5(10)90.91%
4(1)9.09%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 194
Subtotal
Rp66.000
Water Level sensor Float switch 100mm 10cm Stainless steel arduino
Rp66.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
*** READY STOCK, SILAHKAN DI ORDER ***
*** Stainless Steel Liquid Water Level Sensor Horizontal Float Switch panjang 100mm ***
Tank Water Level Sensor Monitor Miniature Stainless Steel Float Switch M10 x 1.5mm
Note:
Alat tersebut hanyalah saklar, Tegangan Maksimal 250V, dan agar di perhatikan, maksimal beban adalah 10W. Agar dipasang sesuai spesifikasi.
Specification:
Max Contact Load: 10W
Voltage: 5V / 12V / 24V / 110V / 220V
Max Switch Current: 1A
Min Break Voltage: 250 V
Max Load Current: 1.0A
Max Contact Resistance: 100mΩ
Temperature Rating:-30-125°C
Float Ball Material: SUS304
Float Body Material: SUS304
Screw Nut Material: SUS304
E-Ring Material:SUS304
O-Ring Material:Silicon
Thread Size: M10 (approx. 10mm)
Cable Length: approx. 350mm
Float Ball Size: approx. 28x28mm
Features:
This is a stainless steel float switch,contains no mercury.
Light weight and simple working principle,high reliability.
This float switch is a device used to sense the level of liquid within a tank,the switch may activate a pump,an indicator,an alarm,or other device.
This float switch is a simple structure,easy installation liquid level does not have a complex circuit,will not be disturbed,as long as the material selection,liquid,pressure or temperture can be used in any environment.
The versatility of this vertically monted sensor means that it can be installed either at the top or base of your tank,depending on whether you wish to detect the water rise or fall.
The float level switch is widely used in electronic,electrical,chemical,water treatment,drainage and other walks of life level control and alarm.
Package Included:
1 x Float level Switch lurus stainless 100mm
Note:
Ini cuma saklar mekanik yang hanya bisa dilalui oleh arus kecil. Hanya untuk disambungkan dengan Microcontroller, Arduino, PLC ataupun Relay. Jangan langsung dihubungkan motor atau pompa karena gak akan kuat dilalui arus besar. Bila dipaksakan akan rusak. Agar menambahkan relay untuk ke beban.
*** Stainless Steel Liquid Water Level Sensor Horizontal Float Switch panjang 100mm ***
Tank Water Level Sensor Monitor Miniature Stainless Steel Float Switch M10 x 1.5mm
Note:
Alat tersebut hanyalah saklar, Tegangan Maksimal 250V, dan agar di perhatikan, maksimal beban adalah 10W. Agar dipasang sesuai spesifikasi.
Specification:
Max Contact Load: 10W
Voltage: 5V / 12V / 24V / 110V / 220V
Max Switch Current: 1A
Min Break Voltage: 250 V
Max Load Current: 1.0A
Max Contact Resistance: 100mΩ
Temperature Rating:-30-125°C
Float Ball Material: SUS304
Float Body Material: SUS304
Screw Nut Material: SUS304
E-Ring Material:SUS304
O-Ring Material:Silicon
Thread Size: M10 (approx. 10mm)
Cable Length: approx. 350mm
Float Ball Size: approx. 28x28mm
Features:
This is a stainless steel float switch,contains no mercury.
Light weight and simple working principle,high reliability.
This float switch is a device used to sense the level of liquid within a tank,the switch may activate a pump,an indicator,an alarm,or other device.
This float switch is a simple structure,easy installation liquid level does not have a complex circuit,will not be disturbed,as long as the material selection,liquid,pressure or temperture can be used in any environment.
The versatility of this vertically monted sensor means that it can be installed either at the top or base of your tank,depending on whether you wish to detect the water rise or fall.
The float level switch is widely used in electronic,electrical,chemical,water treatment,drainage and other walks of life level control and alarm.
Package Included:
1 x Float level Switch lurus stainless 100mm
Note:
Ini cuma saklar mekanik yang hanya bisa dilalui oleh arus kecil. Hanya untuk disambungkan dengan Microcontroller, Arduino, PLC ataupun Relay. Jangan langsung dihubungkan motor atau pompa karena gak akan kuat dilalui arus besar. Bila dipaksakan akan rusak. Agar menambahkan relay untuk ke beban.
Ada masalah dengan produk ini?