Atur jumlah dan catatan
Stok: Tidak Dijual
Subtotal
-
PLC VEICHI CPU VC5-1616MAT-8 DC24V 16 Input 16 Transistor Output
Rp11.032.900
VC5 Series High Performance PLC
CPU (VC5 - 1616MAT - 8)
VC5 CPU, DC24V,16 input,16 transistor output (with eight 200KHz pulse input,eight 200KHZ pulse output), standard 2 serial port,1 USB, 1 CANOpen, 1Ethernet,1 EtherCAT; Up to 8 axis, AC220V.
VC5 series EtherCAT bus high performance PLC overview
VC5 series PLC is a new generation of bus high-performance PLC developed by VEICHI. Using dual-core architecture technology, it has powerful motion control capabilities, the fastest communication cycle is 250μs, and the synchronization time accuracy is ±80ns. EtherCAT bus motion control of up to 32 real axes can be realized. It can meet the requirements of belt shaft capacity and strict cost control requirements, reducing the pressure on manufacturing.
- Support 32-axis EtherCAT bus motion control
- Support CanOpen protocol
- Realize multi-level network communication
VC5 supports EtherCAT, Ethernet (Modbus-TCP, TCP/IP), CANopen, RS485 (Modbus, free protocol), RS232, Type-C. Support the N:N protocol independently developed by VEICHI. Multi-level network communication can be realized. In the occasions where there is information interaction with servo, vision, robot, code scanning gun, MES, etc., it brings all-around efficiency improvement for manufacturing.
- Support electronic cam and electronic gear function
- Linear interpolation, circular interpolation
- COM interface
The CPU module provides 1 RS232 and 1 RS485 serial communication port, named COM0 and COM1 respectively, and the maximum communication bit rate is 115.2k. COM0 port can be used as a programming port and also supports Modbus RTU slave protocol. COM1 supports Modbus RTU master/slave protocol, accessible communication, N:N protocol, built-in terminal resistance, and can be dialed.
CPU (VC5 - 1616MAT - 8)
VC5 CPU, DC24V,16 input,16 transistor output (with eight 200KHz pulse input,eight 200KHZ pulse output), standard 2 serial port,1 USB, 1 CANOpen, 1Ethernet,1 EtherCAT; Up to 8 axis, AC220V.
VC5 series EtherCAT bus high performance PLC overview
VC5 series PLC is a new generation of bus high-performance PLC developed by VEICHI. Using dual-core architecture technology, it has powerful motion control capabilities, the fastest communication cycle is 250μs, and the synchronization time accuracy is ±80ns. EtherCAT bus motion control of up to 32 real axes can be realized. It can meet the requirements of belt shaft capacity and strict cost control requirements, reducing the pressure on manufacturing.
- Support 32-axis EtherCAT bus motion control
- Support CanOpen protocol
- Realize multi-level network communication
VC5 supports EtherCAT, Ethernet (Modbus-TCP, TCP/IP), CANopen, RS485 (Modbus, free protocol), RS232, Type-C. Support the N:N protocol independently developed by VEICHI. Multi-level network communication can be realized. In the occasions where there is information interaction with servo, vision, robot, code scanning gun, MES, etc., it brings all-around efficiency improvement for manufacturing.
- Support electronic cam and electronic gear function
- Linear interpolation, circular interpolation
- COM interface
The CPU module provides 1 RS232 and 1 RS485 serial communication port, named COM0 and COM1 respectively, and the maximum communication bit rate is 115.2k. COM0 port can be used as a programming port and also supports Modbus RTU slave protocol. COM1 supports Modbus RTU master/slave protocol, accessible communication, N:N protocol, built-in terminal resistance, and can be dialed.
Ada masalah dengan produk ini?
ULASAN PEMBELI

Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan