GX-H15A PANASONIC Rectangular-shaped Inductive Proximity Sensor original SUNX

GX-H15A PANASONIC
Part NumberGX-H15AProducts NameRectangular-shaped Inductive Proximity SensorProduct detailsNPN outputThe price of the productPlease contact our officeMax. operation distance5 mm 0.197 in plus or minus 8 %
(Note) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object.Stable sensing range0 to 4.2 mm 0 to 0.165 in
(Note) The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fluctuation.Standard sensing objectIron sheet 20 × 20 × t 1 mm 0.787 × 0.787 × t 0.039 inApplicable regulations and certificationsCE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations)Hysteresis20 % or less of operation distance(with standard sensing object)RepeatabilityAlong sensing axis, perpendicular to sensing axis: 0.04 mm 0.002 in or lessSupply voltage12 to 24 V DC +10/-15 % Ripple P-P 10 % or lessCurrent consumption15 mA or lessOutputNPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 2 V or less (at 100 mA sink current)Output:Output operationNormally openOutput:Utilization categoryDC-12 or DC-13Max. response frequency250 HzOperation indicatorOrange LED(lights up when the output is ON)ProtectionIP68 (IEC), IP68g (JEM)
(Note) Panasonic Electric Works SUNX's IP68 test method
1. Immerse at 0 m below 0 ℃ +32 ℉ water surface and leave for 30 min. Then, immerse at 0 m below +70 ℃ +158 ℉ water surface and leave for 30 min.
2. Regard the heat shock test in 1 as one cycle and perform 20 cycles.
3. Leave in water at a depth of 1 m 3.281 ft in water for 500 hours.
4. After tests 1 to 3, insulation resistance, voltage withstandability, current consumption, and sensing ranges must meet the standard values.
(Note) If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil.Ambient temperature-25 to +70 ℃ -13 to +158 ℉ , Storage: - 40 to +85 ℃ - 40 to +185 ※Ambient humidity45 to 85 % RH, Storage: 35 to 95 % RHVoltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosureInsulation resistance50 MΩ , or more, with 500 V DC megger between all supply terminals connected together and enclosureVibration resistance10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (Max. 20 G) in X, Y and Z directions for two hours eachShock resistance10,000 m/s2 acceleration (1,000 G approx.) in X, Y and Z directions three times eachSensing range variation:Temperature characteristicsOver ambient temperature range -25 to +70 ℃ -13 to +158 ℉ : Within plus or minus 8 % of sensing range at +23degrees +73.4degrees Fahrenheit .Sensing range variation:Voltage characteristicsWithin plus or minus 2 % for +10/-15 % fluctuation of the supply voltageMaterialEnclosure: PBT
Indicator part: Polycarbonate / PolyesterCable0.15 mm2 3-core oil, heat and cold resistant cabtyre cable, 1 m 3.281 ft longCable extensionExtension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable