5.0/ 5.0
100% pembeli merasa puas
5 rating • 1 ulasan
5(5)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 2
Subtotal
Rp1.800.000
DFRobot Gravity Analog Electrical Conductivity Sensor EC Meter K=10
Rp1.800.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: SENSOR MODULE
DFRobot Gravity Analog Electrical Conductivity Sensor Konduktifitas Elektrik EC Meter K=10
Features :
- 3.0~5.0V wide voltage input，0~3.2V output voltage, which is compatible with 5V and 3.3V mainboard
- AC excitation source, effectively reduce polarization
- Gravity connector and BNC connector, plug and play, no welding
- Software library supports single-point calibration, and automatically identifies standard buffer solution, integrates temperature compensation algorithm
- Uniform size and connector , convenient for the design of mechanical structures
Signal Conversion Board Specification :
- Supply Voltage : 3.0~5.0V
- Output Voltage : 0~3.2V
- Probe Connector : BNC
- Signal Connector : PH2.0-3Pin
- Measurement Accuracy : ±5% F.S.
- Board size : 42mm*32mm
Electrical Conductivity Probe Specification :
- Probe Type: Laboratory Grade
- Cell Constant : 10±2
- Support Detection Range : 10~100ms/cm
- Temperature Range : 0~40°C
- Probe Life : >0.5 years (Actual life is related to the frequency of use and scene)
- Cable Length : 100±2cm
Info produk lebih lanjut dapat dicek diwebsite DFRobot resmi
https://www.dfrobot.com/product-1797.html
Features :
- 3.0~5.0V wide voltage input，0~3.2V output voltage, which is compatible with 5V and 3.3V mainboard
- AC excitation source, effectively reduce polarization
- Gravity connector and BNC connector, plug and play, no welding
- Software library supports single-point calibration, and automatically identifies standard buffer solution, integrates temperature compensation algorithm
- Uniform size and connector , convenient for the design of mechanical structures
Signal Conversion Board Specification :
- Supply Voltage : 3.0~5.0V
- Output Voltage : 0~3.2V
- Probe Connector : BNC
- Signal Connector : PH2.0-3Pin
- Measurement Accuracy : ±5% F.S.
- Board size : 42mm*32mm
Electrical Conductivity Probe Specification :
- Probe Type: Laboratory Grade
- Cell Constant : 10±2
- Support Detection Range : 10~100ms/cm
- Temperature Range : 0~40°C
- Probe Life : >0.5 years (Actual life is related to the frequency of use and scene)
- Cable Length : 100±2cm
Info produk lebih lanjut dapat dicek diwebsite DFRobot resmi
https://www.dfrobot.com/product-1797.html
Ada masalah dengan produk ini?