Ortofon 2MRBronze 2MR Bronze Moving Magnet MM Catridge Vinyl Player

Ortofon 2MR features a specially designed cartridge housing tailored for turntables and tonearms like Rega matching their requirement for low-form factor cartridges. With its narrow cartridge housing, it seamlessly integrates without a need for modifications or spacers under the tonearm, enabling quick and easy mounting with just two screws. Ortofon 2MR cartridges features unique to Ortofon technologies like: High-performance quad coil motor system with split pole pins, Proprietary Ortofon premium and high-end rubber dampers plus full compatibility with the Ortofon 2MR series styli.
The 2MR Bronze features a Nude Fine Line diamond, which is particularly suited for demanding applications. The slim profile of the Fine Line stylus will track even the highest frequency information. Additionally, its larger footprint ensures reduced distortion and record wear. The 2MR Bronze uses a special upgraded engine, featuring split pole pins with a silver plated copper wire.
Output voltage at 1 kHz, 5cm/sec: 5 mV
Channel balance at 1 kHz: 1 dB
Channel separation at 1 kHz: 26 dB
Channel separation at 15 kHz: 15 dB
Frequency range at -3 dB: 20 - 29,000 Hz
Frequency response: 20 - 20,000 Hz +2/-0 dB
Tracking ability at 315 Hz at recommended tracking force: 80 μm
Compliance, dynamic, lateral: 22 μm/mN
Stylus type: Nude Fine Line
Stylus tip radius: r/R 8/40 μm
Tracking force range: 1.4 - 1.7 g (14 - 17 mN)
Tracking force recommended: 1.5 g (15mN)
Tracking angle: 20°
Internal impedance, DC resistance: 1.2 kOhm
Internal inductance: 630 mH
Recommended load resistance: 47 kOhm
Recommended load capacitance: 150 - 300 pF
Cartridge colour, body/stylus: Black/Bronze
Weight: 6 g
Height: 14mm