Audio Technica AT2050 - AT2050

Audio Technica AT2050 ORIGINAL PRODUK Features Three switchable polar patterns: omni, cardioid, figure-of-eight Switchable 80 Hz high-pass filter and 10 dB pad Large diaphragm for smooth, natural sound and low noise State-of-the-art surface-mount electronics ensure compliance with A-T’s stringent consistency and reliability standards Includes shock mount amp; protective pouch The versatile AT2050 provides consistent, superior performance in switchable cardioid, omnidirectional and figure-of-eight polar pattern settings. Its dual large diaphragms are gold-vaporized and aged to achieve optimum characteristics over years of use. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the microphone is ideal for studio and live sound use on vocals, piano, strings, drum overheads, guitar amps, and more. ELEMENT : Externally-polarized (DC bias) condenser POLAR PATTERNS : Cardioid, Omnidirectional, Figure-of-Eight FREQUENCY RESPONSE : 20-20,000 Hz LOW FREQUENCY ROLL-OFF : 80 Hz, 12 dB/octave OPEN CIRCUIT SENSITIVITY : 42 dB (7.9 mV) re 1V at 1 Pa IMPEDANCE : 120 MAXIMUM INPUT SOUND LEVEL : 149 dB SPL, 1 kHz at 1% T.H.D.; 159 dB SPL, with 10 dB pad (nominal) NOISE 17 dB SPL DYNAMIC RANGE (TYPICAL) : 132 dB, 1 kHz at Max SPL SIGNAL-TO-NOISE RATIO : 77 dB, 1 kHz at 1 Pa PHANTOM POWER REQUIREMENTS : 11-52V DC, 4.7 mA typical SWITCHES : Polar selection; Flat, roll-off; 10 dB pad (nominal) WEIGHT : 412 g DIMENSIONS : 170.0 mm (6.69 #34;) long, 52.0 mm (2.05 #34;) maximum body diameter OUTPUT CONNECTORS : Integral 3-pin XLRM-type ACCESSORIES FURNISHED : AT8458 shock mount for 5/8 #34;-27 threaded stands; 5/8 #34;-27 to 3/8 #34;-16 threaded adapter; soft protective pouch AUDIO-TECHNICA CASE STYLE : R5 DAPATKAN FREE MIC STAND TANYAKAN STOK TERLEBIH DAHULU