Atur jumlah dan catatan
Stok Total: Sisa 10
Subtotal
Rp6.800.000
Textile Density Hardness Tester HT-6510T-5 Kain Kepadatan Kekerasan Tekstil Meter HT6510T5 Landtek Ball 5mm Carpet Yarns Spool Cones Hardnes Indenter Spring Force HT6510T-5
Rp6.800.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Alat ukur kekerasan/ kepadatan Tekstil dirancang khusus untuk melakukan pengukuran kekerasan tekstil berdasarkan pengukuran kekuatan resistansi penetrasi bola terhadap spool di bawah beban pegas
====
To measure the winding density (hardness) of textile bobbins, beams, spools, cones, dye packages etc.
* Convertible probe, the curved end of the probe is used for the bobbin with a diameter less than or equal to 400mm, and the flat end of the probe is suitable for the bobbin with a diameter greater than 400mm.
* With average calculate function.
* Peak value deposit function.
* Under-voltage alarm function.
* Use USB data output to connect with PC.
* Provide Bluetooth data output choice.
The principle used to measure textile hardness is based on measuring the resistance force of the penetration of a ball against the spool under a known spring load. The measuring principle is the same as for the Shore A hardness test.
Model：HT-6510T-5
Parameters：Tested Result/Mean Value/Max.Value
Indenter：Ball 5mmΦ
Convertible Probe：The curved end of the probe is used for the bobbin with a diameter less than or equal to 400mm, and the plane end of the probe is suitable for the bobbin with a diameter greater than 400mm
Area Of Application：For loosely wound bobbins of synthetic fibers and closely wound natural fibers, yarns and threads
Display Range：0-100H (hardness graduation marks)
Testing Range：10-90H (hardness graduation marks)
Resolution：0.1H
Accuracy：≤±1H
Battery Indicator：Low Battery Indicator
Auto Switch Off：√
Depth Of Indentation*：0-2.5mm
Test Pressure**：Approx. 12.5N
Measuring Spring Force*：0.55-8.065N
Scale Diameter：51mm
Working Face Radius：55mm (when using the curved end of the probe)
Working Face Flat：45mmΦ (when using the plane end of the probe)
<;80%RH
Power Supply：2x1.5V AAA(UM-4)Battery(Not including batteries)
Dimensions：177x65x45mm
Weight：Approx. 285g
====
To measure the winding density (hardness) of textile bobbins, beams, spools, cones, dye packages etc.
* Convertible probe, the curved end of the probe is used for the bobbin with a diameter less than or equal to 400mm, and the flat end of the probe is suitable for the bobbin with a diameter greater than 400mm.
* With average calculate function.
* Peak value deposit function.
* Under-voltage alarm function.
* Use USB data output to connect with PC.
* Provide Bluetooth data output choice.
The principle used to measure textile hardness is based on measuring the resistance force of the penetration of a ball against the spool under a known spring load. The measuring principle is the same as for the Shore A hardness test.
Model：HT-6510T-5
Parameters：Tested Result/Mean Value/Max.Value
Indenter：Ball 5mmΦ
Convertible Probe：The curved end of the probe is used for the bobbin with a diameter less than or equal to 400mm, and the plane end of the probe is suitable for the bobbin with a diameter greater than 400mm
Area Of Application：For loosely wound bobbins of synthetic fibers and closely wound natural fibers, yarns and threads
Display Range：0-100H (hardness graduation marks)
Testing Range：10-90H (hardness graduation marks)
Resolution：0.1H
Accuracy：≤±1H
Battery Indicator：Low Battery Indicator
Auto Switch Off：√
Depth Of Indentation*：0-2.5mm
Test Pressure**：Approx. 12.5N
Measuring Spring Force*：0.55-8.065N
Scale Diameter：51mm
Working Face Radius：55mm (when using the curved end of the probe)
Working Face Flat：45mmΦ (when using the plane end of the probe)
<;80%RH
Power Supply：2x1.5V AAA(UM-4)Battery(Not including batteries)
Dimensions：177x65x45mm
Weight：Approx. 285g
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan