Promo : KIEPE Elektrik - PULL ROPE SWITCH - HEN 002

KIEPE Elektrik - Pull Rope Switch

The pull-rope emergency stop switch is actuated by a pull rope 1
connected on both sides of the red release lever. The contacts are
actuated by a spring supported cam disc (snap action function).
At the same time, up to three NC and NO contacts are actuated
simultaneously and a cross comparison of the contacts can be
performed with an external control unit.
The emergency stop signal is performed with positive-making
normally closed (NC) contacts in accordance with the closed circuit
principle.
After the emergency stop function is triggered, the switching
mechanism is locked in the shut-off position "0". When the blue
reset lever is actuated in switch position "1", the switching contacts
are reactivated and the conveyor belt is prepared for being
turned back on again.
Resetting the pull-rope emergency stop switch must not cause the
conveyor system to start up.