Fiber Optik Sensor Autonics BF4R Best

Type Standard type
Light source Red LED(660nm)
Response time Frequency 1 Max. 0.5ms; Frequency 2 Max. 0.7ms
Power supply 12-24VDC ±10%(ripple P-P max. 10%)
Current consumption Max. 45mA
Operation mode Light ON/Dark ON(set by ON/OFF button)
Control output NPN open collector
Timer function OFF Delay(40ms)
Sensitivity adjustment Manual
Environment_Ambient illumination Sunlight Max. lx, Incandescent lamp Max. lx (received illumination)
Environment_Ambient temperature -10 to 50℃, storage -20 to 70℃
Environment_Ambient humidity 35 to 85% RH, storage 35 to 85% RH
Mutual interference prevention Built-in differential frequency mode(frequency 1(normal mode) max. 0.5ms, frequency 2 max. 0.7ms)
Self-diagnosis output ON state under unstable sensing(when the target stays for 300ms in unstable level), ON state when control output is short-circuited
•Load voltage Max. 30VDC
•Load current Max. 50mA
•Residual voltage - Max. 1V(load current 50mA), Ma
Material Case Heat-resistance acrylonitrile butadiene styrene, Cover Polycarbonate
Cable specification Ø4mm, 4-wire, 2m(AWG22, core diameter 0.08mm, number of cores 60, insulator out diameter Ø1.25mm)
Accessories Fixing bracket, Bolts, Nuts


=