Download Tokopedia App
Tentang TokopediaMitra TokopediaMulai Berjualan PromoTokopedia Care
tokopedia-logo
Kategori
Atur jumlah dan catatan

Stok Total: 5330

Subtotal

Rp278.000

Celestron Nexstar Hand Control USB RS232 Serial to RJ9 4P4C Update Firmware Cable for Celestron Nextstar Hand Control

Rp278.000
  • Kondisi: Baru
  • Waktu Preorder: 30 Hari
  • Min. Pemesanan: 1 Buah
  • Etalase: Semua Etalase
Celestron Nexstar Hand Control USB RS232 Serial to RJ9 4P4C Update Firmware Cable for Celestron Nextstar Hand Control



Please note this listing is a RS232 cable, NOT TTL cable.


The Celestron USB RS-232 Cable is used to connec your PC or computer to NexStar computerized telescopes via a port in the hand control.
Attaches to the computer's USB port and the telescope's hand control via a phone jack plug.
The Celestron Nexstar USB RS-232 cable is also necessary for flash upgrades to hand control software.
Cable: 3C*28AWG black PVC jacket
Length: 100cm, 180cm, 300cm optional, other Length can be customized
RS232 signal level

Original Prolific PL2303GT chipset

GND, TXD, RXD optional

PC COM RS232 standard signals, not TTL

Pinout Wiring: 1-RXD, 2-GND, 4-TXD

TX is match with RX of device, RX is match with TX of device

Support Win XP/9X, Win 7, Linux, CE, etc


About PL2303GT
PL2303GT USB to RS232 Serial Bridge Controller With Built-in RS232 Transceiver USB Interface
- Single-chip USB to RS232 asynchronous serial data transfer interface.
- Fully Compliant with USB 2.0 specification (Full-Speed Mode).
- UHCI/OHCI (USB 1.1), EHCI (USB 2.0), xHCI (USB 3.1) Host Controller Compatible.
- Royalty-free USB to Virtual Com Port (VCP) drivers for Windows, Mac, Linux, and Android.
- Highly integrated USB 1.1 FS Transceiver. Integrated termination resistors and pull-up resistor to reduce PCB external components.
- Supports OTPROM (One-Time Programmable ROM) for USB device descriptors configuration. OTPROM can be programmed directly through USB port.
- Each IC has unique ID (for Serial Number).
- Supports bus-power, self-power and high-power USB device configuration.
- Supports Windows USB Selective Suspend (Remote Wakeup enabled).
- Supports 3.3V VBUS voltage operation



UART Interface (RS232)
- Built-in RS232 Transceiver:
-- Meets EIA/TIA-232F standards with 5.0V power supply
-- Guaranteed 1000kbps transmission rate under loading
-- Three RS232 Drivers design
-- Five RS232

Ada masalah dengan produk ini?

ULASAN PEMBELI

Toped Illustration

Belum ada ulasan untuk produk ini

Beli produk ini dan jadilah yang pertama memberikan ulasan