4.9/ 5.0
100% pembeli merasa puas
17 rating • 7 ulasan
5(16)94.12%
4(1)5.88%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 21
Subtotal
Rp9.000
Relay 5V 1 Channel Arduino Module 5 V Low Trigger Relay
Rp9.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Aksesoris Elektronika
=============================================================
Kita menggunakan manajemen produk selama iklan masih ada stok masih ada
Pengiriman 2 kali pengiriman pagi jam 12 dan sore jam 4
Pengiriman Senin Sampai Sabtu, hari minggu ada pengiriman max jam 9 pagi, input resi tetap senin
Jika kurang jelas dapat menghubungi kami via wa ke nomer yang tertera di toko
=============================================================
Features:
1. With isolation groove in control area and load area.
2. With power and relay action indication, bright when connect and go off when disconnects.
3. When there is a signal in signal input, public side and common side will breakover.
4. It can be not only used as a microcontroller development board module, but also as a home appliance control.
5. It can not only control the DC or AC signal, but the 220V AC load.
6. With a permanent open and close vents contact.
7. It is convenient to connect with blue KF301 terminal access control cable.
Specification:
1. VCC: Power interface ,5V
2. GND: Ground
3. IN: Control interface .Drive Current at least 4mA
4. COM: Control circuit ground ,Connect to GND
5. Size: approx. 41 x 16 x 16mm/ 1.61 x 0.62 x 0.62''
6. Weight: approx. 12g
Kita menggunakan manajemen produk selama iklan masih ada stok masih ada
Pengiriman 2 kali pengiriman pagi jam 12 dan sore jam 4
Pengiriman Senin Sampai Sabtu, hari minggu ada pengiriman max jam 9 pagi, input resi tetap senin
Jika kurang jelas dapat menghubungi kami via wa ke nomer yang tertera di toko
=============================================================
Features:
1. With isolation groove in control area and load area.
2. With power and relay action indication, bright when connect and go off when disconnects.
3. When there is a signal in signal input, public side and common side will breakover.
4. It can be not only used as a microcontroller development board module, but also as a home appliance control.
5. It can not only control the DC or AC signal, but the 220V AC load.
6. With a permanent open and close vents contact.
7. It is convenient to connect with blue KF301 terminal access control cable.
Specification:
1. VCC: Power interface ,5V
2. GND: Ground
3. IN: Control interface .Drive Current at least 4mA
4. COM: Control circuit ground ,Connect to GND
5. Size: approx. 41 x 16 x 16mm/ 1.61 x 0.62 x 0.62''
6. Weight: approx. 12g
Ada masalah dengan produk ini?