Keyence Pressure Sensor AP-C40W Original Genuine

Brand Name: Keyence Model: AP-C40W Type: Amplifier Unit, NPN Applicable sensor head: AP-41M, AP-41, AP-43, AP-44, AP-48 Set and display range: -15 to +110 % of F.S.*1 Display: 3 1/2-digit, 2-colour, 7-segment LED (Character height: 11 mm), Display cycle: 10 times/s Operation indicator: Red LED x 2 (corresponding to control output 1 and 2) Repeatability: ±0.2 % of F.S. Display resolution: AP-41M/41: Standard mode 0.1 kPa, High-resolution/Focus mode 0.01 kPa AP-43: Standard mode 0.001 MPa, High-resolution/Focus mode 0.1 kPa AP-44/48: Standard mode 0.1 kPa, High-resolution/Focus mode 0.02 kPa Power consumption: Normal: 12 V: 780 mW (65 mA) max., 24 V: 1,080 mW (45 mA) max. Display temperature characteristic: ±1 % of F.S. max. Hysteresis: Variable (Standard: 0.5 % of FS; high-resolution/focus mode: 0.1 % of F.S.) Response time (Chattering prevention function): 1 (in high-speed mode only), 2.5, 5, 100, or 500 ms (selectable) I/O: Analogue output: 1 to 5 V with load impedance of 1 kW max. (or zero-shift input selectable) Zero-shift input: Input time: 2 ms or more (or analog output selectable) Control output: NPN open collector 100 mA max. (at 40 V or below) with max., residual voltage of 1 V, 2 outputs (NO or NC selectable) Rating: Power voltage: 12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less Power consumption: Eco mode: 12 V: 540 mW (45 mA) max., 24 V: 840 mW (35 mA) max. Environmental resistance: Ambient temperature: 0 to +50 °C (No freezing) Relative humidity: 35 to 85 % RH (No condensation) Vibration resistance: 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions Material: Front housing: Polysulfone, Rear housing: PBT, Front seat: Polycarbonate Accessories: Power supply code (2-m cable with connector), head connector, and unit seal Weight: Approx. 74 g (with 2-m cable) Note: - Barang 100% Original - Barang Baru Bukan Barang Bekas/Second - Barang Indent/PreOrder, Harap Chat Terlebih Dahulu Sebelum Order Terima Kasih.