Autonics BF4R autonic Fiber sensor Amplifier auto tune original

Data sheet
 
Type: Standard typeLight source: Red LED(660nm)Response time: Frequency 1: Max. 0.5ms; Frequency 2: Max. 0.7msPower supply: 12-24VDC ±10%(ripple P-P: max. 10%)Current consumption: Max. 45mAOperation mode: Light ON/Dark ON(set by ON/OFF button)Control output: NPN open collectorTimer function: OFF Delay(40ms)Sensitivity adjustment: ManualEnvironment_Ambient illumination: Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination)Environment_Ambient temperature: -10 to 50℃, storage: -20 to 70℃Environment_Ambient humidity: 35 to 85% RH, storage: 35 to 85% RHMutual interference prevention: Built-in differential frequency mode(frequency 1(normal mode): max. 0.5ms, frequency 2: max. 0.7ms)Self-diagnosis output: ON state under unstable sensing(when the target stays for 300ms in unstable level), ON state when control output is short-circuited•Load voltage: Max. 30VDC•Load current: Max. 50mA•Residual voltage - Max. 1V(load current: 50mA), MaMaterial: Case: Heat-resistance acrylonitrile butadiene styrene, Cover: PolycarbonateCable specification: Ø4mm, 4-wire, 2m(AWG22, core diameter: 0.08mm, number of cores: 60, insulator out diameter: Ø1.25mm)Accessories: Fixing bracket, Bolts, Nuts
 
※The weight includes packaging. The weight in parenthesis is for unit only.※The temperature or humidity mentioned in Environment indicates a non freezing or condensation.