DIGITAL INPUT UNIT NX-AD3603 OMRON ORIGINAL

Tolong konfirmasi ketersediaan stock dan harga sebelum order

Product name : Voltage Input type
Number of points : 4 points
Input range : -10 to +10 V
Resolution : 1/8000 (full scale)
Conversion value, decimal number (0 to 100%) : -4000 to 4000
Over all accuracy (25°C) : ±0.2% (full scale)
Input method : Single-ended input
Conversion time : 250 μs/ point
Input impedance : 1 MΩ min.
I/O refreshing method : Free-Run refreshing
External connection terminals : Screwless clamping terminal block (12 terminals)
Indicator : TS indicator
Input method : Single-ended input
Input conversion range : -5 to 105% (full scale)
Absolute maximum rating : ±15 V
Input impedance : 1 MΩ min.
Overall accuracy :
- 25°C : ±0.2% (full scale)
- 0 to 55°C : ±0.4% (full scale)
Conversion time 250 μs/point
Dimensions : 12 (W) x 100 (H) x 71 (D)
Isolation method : Between the input and the NX bus: Power = Transformer, Signal = Digital isolator (no isolation between inputs)
Insulation resistance : 20 MΩ min. between isolated circuits (at 100 VDC)
Dielectric strength : 510 VAC between isolated circuits for 1 minute at a leakage current of 5 mA max.
I/O power supply method : Supply from the NX bus
Current capacity of I/O power supply terminal :
- IOV : 0.1 A/terminal max.,
- IOG: 0.1 A/terminal max.
NX Unit power consumption :
• Connected to a CPU Unit or Communication Control Unit 1.35 W max.
• Connected to a Communications Coupler Unit 1.10 W max.
I/O current consumption : No consumption
Installation orientation and restrictions :
Installation orientation :
• Connected to a CPU Unit or Communication Control Unit : Possible in upright installation.
• Connected to a Communications Coupler Unit : Possible in 6 orientations.
Restrictions : No restrictions
Input disconnection detection : Not supported.