Download Tokopedia App
Tentang TokopediaMulai Berjualan PromoTokopedia Care
tokopedia-logo
Kategori
Atur jumlah dan catatan

Stok Total: Sisa 10

Subtotal

Rp1.406.800

SUPTRONICS X1201 UPS Shield 5.1V 5A 2-Cell 18650 Batt Holder with Best

Rp1.406.800
  • Kondisi: Baru
  • Min. Pemesanan: 1 Buah
  • Etalase: Semua Etalase
READY STOCK, SILAHKAN LANGSUNG ORDER
UPS SHIELD + METAL CASE
For Raspberry Pi 5
2-Cells Battery 18650 Holder
Notes :
1. Saat menggunakan UPS HAT ini, seluruh kebutuhan power board Raspberry akan disupply oleh UPS HAT ini.
2. Pada penggunaan dekstop wayland "WAYFIRE", akan MUNCUL notifikasi low voltage (hanya saat awal booting saja), namun itu tidak mengganggu performa maupun fungsi peripherals pada board Raspberry.
3. Pada penggunaan dekstop wayland "X11", TIDAK MUNCUL notifikasi low voltage.
*** ITEM 2 PADA NOTES DIATAS TIDAK DAPAT DIJADIKAN ALASAN UNTUK RETUR/REFUND ***
*** MEMBELI = MEMAHAMI DAN MENYETUJUI ***
PACKAGE LIST :
1. UPS Shield with 2-cell battery holder
2. Metal Case
NOT INLUDED :
-- Battery
-- Board Raspberry Pi 5
-- Cooler
-- etc (other than mentioned in the above package list)
Compatible for :
-- Raspberry Pi 5 (RAM 2GB, 4GB, 8GB, 16GB)
-- Official/Third Party Active Cooler
-- Official/Third Party M.2 HAT
-- NVME top Shield
NOT Compatible :
--- NVME Base/Bottom Board
Order UPS HAT only :
suptronics-x1201-ups-shield-5-1v-5a-2-cell-18650-batt-holder-1730835475074418232
Order Raspberry Pi 5 :
--- RAM 2GB : raspberry-pi-5-2gb-ram-quad-core-processor-2-4ghz
--- RAM 4GB : raspberry-pi-5-4gb-ram
--- RAM 8GB : raspberry-pi-5-8gb-ram
--- RAM 16GB : raspberry-pi-5-16gb-ram-1730776120049960504
Order RELATED Accessories :
-- OFFICIAL ADAPTOR 27W : official-raspberry-pi-27w-usb-c-power-supply-adaptor-5-1v-5a-for-raspberry-pi-5
-- CAFF ADAPTOR 5V/5A : caff-5v-5a-type-c-adaptor-for-raspberry-pi-5-orange-pi-5-pro
-- Active Cooler Fan : abs-case-active-cooler-fan-untuk-raspberry-pi-5
Order NVME HAT :
--- Official M.2 HAT+ : official-raspberry-pi-5-m-2-hat-compatible-for-ssd-nvme-2230-and-2242
--- Waveshare M.2 HAT+ : pcie-to-m-2-hat-for-raspberry-pi-5-support-for-ssd-nvme-2230-and-2242-form-factor
--- M.2 Mini Board : raspberry-pi-5-pcie-to-m-2-mini-board-adapter-support-for-ssd-nvme-m2-2230-integrated-with-active-cooler-fan
===================
OVERVIEW :
X1201 is an innovative uninterruptible power supply (UPS) expansion board designed specifically for the Raspberry Pi 5B. With its advanced features and robust power backup capabilities, the X1201 is perfect for even the most demanding Raspberry Pi setups.
Please note: If the UPS does not detect the RPi5, it will automatically shut down within 3 seconds. So you need to install the RPi 5 on the UPS and make sure that the RPi5 has good contact with the UPS's pogo pins.
FEATURES
UPS Output :
--- Provides continuous operation for up to 6 hours (duration depends on battery type and applications)
--- Supports a maximum current output of 5.1V 5000mA, suitable for most Raspberry Pi applications
--- Convenient pogo pin connection for powering the Pi, eliminating the need for cabling and soldering
Battery Charging :
--- Supports fast battery charging with a capacity of 3000mA
--- Battery charging control can be managed via GPIO
--- Provides protection against battery overcurrent and overvoltage
--- Built-in protection against reverse connection of battery cells
--- Integrated Maxim's fuel-gauge systems for reading battery voltage and percentage over i2c
--- On-board LEDs indicate battery charging and discharging levels of 25%, 50%, 75%, and 100%
--- Features a 2-cell 18650 battery holder
Power Input :
--- Powered through the USB-C socket, eliminating the need to change your power adapter
--- XH2.54 connector provided for alternative power sources
SPECIFICATIONS :

Power input : 5Vdc 5A via USB Type-C / XH2.54-2P connector
UPS output : 5.1V ±5% Max 5A
Battery charging current : Max 2.3-3.2A
Terminal Battery Voltage : 4.23V
Battery Recharge Threshold : 4.1V
Ports & Connectors:
--- USB Type-C socket
--- 18650 battery socket x2
--- 5V Power output connector x3 - XH2.54 2-pin
--- 5V Power input connector x1 - XH2.54 2-pin
--- External power button connector x1 - XH2.54-2P
PCB Size: 106.6mm x 85mm
NOTES :
--- Do not apply power to your Raspberry Pi via the Type-C USB socket.
--- Do not use 18650 battery with built-in protection circuit.
===================
Produk terkait lainnya:
ORANGE PI --> tc-orange-pi
RASPBERRY PI --> raspberry-pi
ARDUINO --> tc-arduino
MINI PC --> tc-mini-pc

Ada masalah dengan produk ini?

ULASAN PEMBELI

Toped Illustration

Belum ada ulasan untuk produk ini

Beli produk ini dan jadilah yang pertama memberikan ulasan