AUTONICS FIBER OPTIC SENSOR BF4R READY STOK

Type: Standard type
Light source: Red LED(660nm)
Response time: Frequency 1: Max. 0.5ms; Frequency 2: Max. 0.7ms
Power supply: 12-24VDC ±10%(ripple P-P: max. 10%)
Current consumption: Max. 45mA
Operation mode: Light ON/Dark ON(set by ON/OFF button)
Control output: NPN open collector
Timer function: OFF Delay(40ms)
Sensitivity adjustment: Manual
Environment_Ambient temperature: -10 to 50℃, storage: -20 to 70℃
Environment_Ambient humidity: 35 to 85% RH, storage: 35 to 85% RH
Mutual interference prevention: Built-in differential frequency mode(frequency 1(normal mode): max. 0.5ms, frequency 2: max. 0.7ms)
Self-diagnosis output: ON state under unstable sensing(when the target stays for 300ms in unstable level), ON state when control output is short-circuited
•Load voltage: Max. 30VDC
•Load current: Max. 50mA
•Residual voltage - Max. 1V(load current: 50mA), Ma
Material: Case: Heat-resistance acrylonitrile butadiene styrene, Cover: Polycarbonate
Accessories: Fixing bracket, Bolts, Nuts

REALPICT BUKAN AMBIL FOTO DARI MBAH GOOGLE.
BARANG READY SILAHKAN DIORDER.

NOTE : Untuk ketersediaan STOCK harap ditanyakan terlebih dahulu ( Terima Kasih )
Selamat Berbelanja !!!