SIEMENS SICAM A8000 CI-8520 module Ethernet interface - 6MF2852-0AA00

Kami Doctor Electrical menjual semua kebutuhan electrical. contact kami: phone +62 813 8916 7494 (WA Only) email   doctor.saleselec@gmail.com Brand New Open Box. Jika unit tidak sesuai dengan perkataan seller silahkan dikembalikan. Wajib di videokan untuk unboxing dari unit yang di pesan, jika tidak disertakan video semua kerusakan tidak ditanggung kami. SICAM A8000 Interface CI-8520, 5 RJ45 - PLC communication module 6MF2852-0AA00 – Siemens – 4025515639060: SICAM A8000 interface CI-8520, 5 RJ45 6MF2852-0AA00 Wherever energy flows - control, remote control and automation in the smallest of spaces. The SICAM A8000 series is a new modular device series for telecontrol and automation applications in all areas of energy supply. When developing the device series, requirements for a wide range of applications were taken into account. The most important properties at a glance: For harsh environmental conditions thanks to mechanically stable modules and an extended temperature range from -40 to +70° C. High dielectric strength up to 5kV (IEC 60255) for direct use in switchgear. Fulfillment of the cyber security requirements of tomorrow through BDEW white paper conformity, integrated crypto chip and IPSec encryption. Integrated communication interfaces including GPRS on board. Automation functions (IEC 61131-3) e.g.: to control an adjustable local network transformer or for load control. Space-saving design with a module width of 30mm (for CP without display). Scalable thanks to the ability to combine the individual I/O modules. Long product life cycle and high investment security through the use of standards such as: B. IEC 61850. The functionalities of the 3-level intelligence are also available with the SICAM A8000 series: The functionalities of the 3-level intelligence are also available with the SICAM A8000 series: Monitoring: In the first level the focus is on the Monitoring of stations to enable rapid fault localization and high availability. Remote control: In addition to monitoring, the second level also includes the remote control of the switchgear and enables a significant reduction in downtime. Fault isolation and resupply of the de-energized network sections are no longer difficult tasks for the network supplier. Load flow control: In the third stage, the effects of decentralized feed-ins are managed using automation. This way, network losses can be significantly reduced.