PLC LS XGI-CPUH CPU Module XGT Series

General sequence controller PLC CPU Module

Type : XGI-CPUH
CPU Module, Memory 512 Kbytes, 28ns/step, Max. 6,144 I/O, Built-in RS-232C, USB

Operation system : Reiterative operation, fixed cycle operation, constant scan
I/O Control system : Scan synchronous batch processing system(refresh system), direct system by command
Program language :Ladder Diagram, SFC (Sequential Function Chart), ST (Structured Text)
Operation processing speed (basic command) :
- Operator : 18
- Basic function : 136 types + real number operation function
- Basic function block : 43
- Dedicated function block : Dedicated function blocks by special function modules, communication dedicated function block(P2P)
- Basic : 0.028㎲/step
- Move : 0.084㎲/step
- Real number operation : (S: Single real number D: Double real number)
± : 0.392㎲(S), 0.924㎲(D)
X : 0.896㎲(S), 2.240㎲(D)
÷ : 0.924㎲(S), 2.254㎲(D)
Program memory capacity : 512KB
I/O points (installable) : 6,144 points
Max. I/O memory contact : 131,072 points
- Symbolic variable area(A) : 512KB (max. 256KB retain settable)
- I variable(I) : 16KB
- Q variable(I) : 16KB
- Direct variable :
M : 256KB (max. 128KB retain settable)
R : 64KB X 2block
W :128KB
Flag variable :
F : 4KB (System flag)
K : 16KB (PID flag)
L : 22KB (High speed link flag)
N : 42KB (P2PParameters)
U : 8KB (Analog data Refresh)
Flash area : 2MB, 32block (1MB, 16block)
Timer : No point limit
Time range: 0.001~ 4,294,967.295 second(1,193 hours)
Counter : No point limit Coefficient range : 64 bit expression
Program structure :
- Total no. of programs : 256
- Initialization task : 1
- Fixed cycle task : 32
- Internal device task : 32
Operation mode : RUN, STOP, DEBUG
Restart mode : Cold, Warm
Self diagnosis : Operation delay monitoring, memory fault, I/O fault, battery fault, power fault and etc
Data protection in case of power failure : Retain area setting by basic parameters
Max. base extension : 7
Current consumption(mA) : 960mA
Weight (kg) : 0.12kg