Uninterruptible Power Supply Module Type-C Mini UPS 12V DIY 18650 with Lithium Battery Charger Baterai DC-DC step up buck converter

UPS Module type-c (output 12v)
Merupakan Module UPS dengan menggunakan 2 baterai 18560 yang otomatis mengisi saat di sambung ke 5v/port type c, dan akan aktif menggantikan supply listrik dengan baterai saat input daya terputus.

Spesifikasi:
Input voltage: DC5V or USB Type-C
Output voltage: 12V/1.2A
Output power: rated maximum 15W
Charging cut-off voltage: 4.2V ± 1%
Battery over discharge protection voltage: 2.5V
Static power consumption of around 10mA

Application scope: It can be used for continuous power supply of network or monitoring equipment such as routers and switches in various scenarios, as well as infrared alarms.

Product Features:
*Automatic charging during incoming calls, uninterrupted switching during power outages, and startup
*Onboard LED charging/full charge/output status indicator light
*Onboard lithium battery has protection functions such as over charge, over discharge, over current, over temperature, etc
*The battery holder can be connected in parallel with multiple sections, ensuring stable and sufficient charging and discharging
*USB Type-C/DC5V power input interface, two power supply modes to choose from

matters needing attention:
1. Pay attention to wiring according to the diagram and do not make mistakes.
2. The positive and negative directions of the battery correspond correctly, otherwise it may cause damage
3. When charging and discharging at the same time or generating excessive heat, please strengthen heat dissipation.
4. If the protection does not output due to incorrect wiring or accidental contact during use, after troubleshooting, the USB 5V power supply can be restored to activate the output.

usage method:
Back battery holder connected to lithium battery -->5V input voltage connected -->UPS+- connected to load

After connecting the battery, the onboard output indicator red light will turn on, and the phone charger and data cable will be plugged into the Type-C interface. The battery charging indicator light will indicate the charging or full charging status.

After connecting the UPS terminal to the load device, when there is power supply at the input terminal, the current is obtained while charging and discharging (the input power supply provides a current of 3A or more). The external power supply is disconnected and automatically switches to battery power supply without delay. When the battery voltage is discharged below 2.5V, the output voltage protection is reduced. When overheating and overload occur, the output red light flashes and is protected.

READY STOCK!!!! SIAP DIKIRIM DENGAN KURIR KEPERCAYAAN ANDA!!!!!

*Barang yang kami jual adalah 100% barang baru dan tersegel