Atur jumlah dan catatan
Stok Total: 150
Subtotal
Rp280.200
Sensor Berat Sel Beban Digital + Sensor Tekanan Modul Iklan Papan Breakout Berat HX711 untuk Elektronik DIY Arduino
Rp280.200
- Kondisi: Baru
- Waktu Preorder: 28 Hari
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Digital Load Cell Weight Sensor + HX711 Weighing Breakout Board AD Module Pressure Sensors for Arduino DIY Electronic
Sensor Berat Sel Beban Digital + Sensor Tekanan Modul Iklan Papan Breakout Berat HX711 untuk Elektronik DIY Arduino
Deskripsi :
Package : SOP
is_customized : Yes
Model Number : Digital Load Cell Weight Sensor + HX711 Weighing
Operating Temperature : Digital Load Cell Weight Sensor + HX711 Weighing
Dissipation Power : Digital Load Cell Weight Sensor + HX711 Weighing
Supply Voltage : Digital Load Cell Weight Sensor + HX711 Weighing
Application : Computer
Condition : New
Type : Voltage Regulator
Brand Name : CRIMP
Origin : Mainland China
Load cells are transducers that convert pressure/force into an electrical signal, only 5-10V driving voltage required. As the electrical signal has typically only a few millivolts, it has to be amplified. And thats where the HX711 breakout board comes in: as it amplifies the weak signal to a few volts so that we can read the signal.
Package contents: 1 x Load Cell
Package contents: 1 x HX711 AD Module
Package contents: 1 x Header 10pins
Wiring:
The load cell has four wires, which must be connected to the first four pins of the HX711 module -- Red wire to E+, black wire to E-, white wire to A-, and green wire to A+. The remaining pins, B- and B+, can be used if a second load cell has to be connected to the HX711 module.
Instructions:
1. One end of the sensor is fixed by a screw hole, and the other end is left in the air.
2. Apply force in the direction indicated by the label.
3. You will retrieve consistent pressure values from the load cell, if you mount the load cell on something that is solid and heavy.
4. Please be careful not to directly press the white latex part to avoid damage to the sensor.
SELAMAT BELANJA, TERIMAKASIH.
Sensor Berat Sel Beban Digital + Sensor Tekanan Modul Iklan Papan Breakout Berat HX711 untuk Elektronik DIY Arduino
Deskripsi :
Package : SOP
is_customized : Yes
Model Number : Digital Load Cell Weight Sensor + HX711 Weighing
Operating Temperature : Digital Load Cell Weight Sensor + HX711 Weighing
Dissipation Power : Digital Load Cell Weight Sensor + HX711 Weighing
Supply Voltage : Digital Load Cell Weight Sensor + HX711 Weighing
Application : Computer
Condition : New
Type : Voltage Regulator
Brand Name : CRIMP
Origin : Mainland China
Load cells are transducers that convert pressure/force into an electrical signal, only 5-10V driving voltage required. As the electrical signal has typically only a few millivolts, it has to be amplified. And thats where the HX711 breakout board comes in: as it amplifies the weak signal to a few volts so that we can read the signal.
Package contents: 1 x Load Cell
Package contents: 1 x HX711 AD Module
Package contents: 1 x Header 10pins
Wiring:
The load cell has four wires, which must be connected to the first four pins of the HX711 module -- Red wire to E+, black wire to E-, white wire to A-, and green wire to A+. The remaining pins, B- and B+, can be used if a second load cell has to be connected to the HX711 module.
Instructions:
1. One end of the sensor is fixed by a screw hole, and the other end is left in the air.
2. Apply force in the direction indicated by the label.
3. You will retrieve consistent pressure values from the load cell, if you mount the load cell on something that is solid and heavy.
4. Please be careful not to directly press the white latex part to avoid damage to the sensor.
SELAMAT BELANJA, TERIMAKASIH.
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan