5.0/ 5.0
100% pembeli merasa puas
19 rating • 4 ulasan
5(19)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 2
Subtotal
Rp6.500
KY-026 Flame Sensor Module 4 Pin Sensor Api Module 4P KY 026
Rp6.500
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Proximity sensors
Hi #RekanEasyWare ...
EasyWare Part#: EP000593
Flame Sensor lainnya:
- RobotDyn: https://tokopedia.com/easyware-id/flame-sensor-module-robotdyn-flame-sensor
- 3P Flame Sensor: https://tokopedia.com/easyware-id/flame-sensor-module-sensor-api
- Flame Sensor 4P Blue Board: https://tokopedia.com/easyware-id/flame-sensor-module-4-pin-for-arduino-sensor-api-4p-blue-board
The Flame Sensor Module can detect flames in the 760 – 1100 nanometer wavelength range. Small flames like a lighter flame can be detected at roughly 0.8m. The detection angle is roughly 60 degrees and the sensor is particularly sensitive to the flame spectrum.
An on-board LM393 op-amp is used as a comparator to adjust the sensitivity level. The sensor has a digital and analog output and sensitivity can be adjusted via the blue potentiometer.
Fitur:
- High Photo Sensitivity.
- Fast Response Time.
- Sensitivity adjustable.
- Detects a flame or a light source of a wavelength in the range of 760nm-1100 nm.
- Detection range: up to 100 cm.
- Adjustable detection range.
- Detection angle about 60 degrees, it is sensitive to the flame spectrum.
- Comparator chip LM393 makes module readings stable.
- Operating voltage 3.3V-5V.
- Digital and Analog Output.
- Power indicator and digital switch output indicator.
Kelengkapan:
- 1x KY-026 Flame Sensor Module 4 Pin
EasyWare Part#: EP000593
Flame Sensor lainnya:
- RobotDyn: https://tokopedia.com/easyware-id/flame-sensor-module-robotdyn-flame-sensor
- 3P Flame Sensor: https://tokopedia.com/easyware-id/flame-sensor-module-sensor-api
- Flame Sensor 4P Blue Board: https://tokopedia.com/easyware-id/flame-sensor-module-4-pin-for-arduino-sensor-api-4p-blue-board
The Flame Sensor Module can detect flames in the 760 – 1100 nanometer wavelength range. Small flames like a lighter flame can be detected at roughly 0.8m. The detection angle is roughly 60 degrees and the sensor is particularly sensitive to the flame spectrum.
An on-board LM393 op-amp is used as a comparator to adjust the sensitivity level. The sensor has a digital and analog output and sensitivity can be adjusted via the blue potentiometer.
Fitur:
- High Photo Sensitivity.
- Fast Response Time.
- Sensitivity adjustable.
- Detects a flame or a light source of a wavelength in the range of 760nm-1100 nm.
- Detection range: up to 100 cm.
- Adjustable detection range.
- Detection angle about 60 degrees, it is sensitive to the flame spectrum.
- Comparator chip LM393 makes module readings stable.
- Operating voltage 3.3V-5V.
- Digital and Analog Output.
- Power indicator and digital switch output indicator.
Kelengkapan:
- 1x KY-026 Flame Sensor Module 4 Pin
Ada masalah dengan produk ini?