Atur jumlah dan catatan
Stok Total: 218
Subtotal
Rp6.500
Modul Relay 1Ch 1 Ch Chanel Channel 12 V Volt 12V Module SPDT Low Level Arduino Compatible Opto Isolation
Rp6.500
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
FEATURES :
- With isolation groove in control area and load area.
- With power and relay action indication, bright when connect and go off when disconnects.
- When there is a signal in signal input, public side and common side will breakover.
- It can be not only used as a microcontroller development board module, but also as a home appliance control.
- It can not only control the DC or AC signal, but the 220V AC load.
- With a permanent open and close vents contact.
- It is convenient to connect with blue KF301 terminal access control cable.
SPECIFICATION :
- VCC : Power interface ,12V
- GND : Ground
- IN : Control interface .Drive Current at least 4mA
- COM : Control circuit ground ,Connect to GND
- Size : approx. 41 x 16 x 16mm
- With isolation groove in control area and load area.
- With power and relay action indication, bright when connect and go off when disconnects.
- When there is a signal in signal input, public side and common side will breakover.
- It can be not only used as a microcontroller development board module, but also as a home appliance control.
- It can not only control the DC or AC signal, but the 220V AC load.
- With a permanent open and close vents contact.
- It is convenient to connect with blue KF301 terminal access control cable.
SPECIFICATION :
- VCC : Power interface ,12V
- GND : Ground
- IN : Control interface .Drive Current at least 4mA
- COM : Control circuit ground ,Connect to GND
- Size : approx. 41 x 16 x 16mm
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan