EKWB EK-Supremacy EVO RGB - Nickel

EK-Supremacy EVO RGB is a flagship high-end, highly adaptable CPU water block, just as all the other EK-Supremacy EVO models so far. By combining jet plates and jet inserts, the cooling engine enables the water block to be fine-tuned for all mainstream Intel and AMD sockets for maximum performance. A high-flow design with low hydraulic restriction also allows this product to be used in setups using weaker water pumps or lower pump speed for added silent operation. The water block comes with pre-installed 4-pin 12V RGB LED strip. The EK-Supremacy EVO RGB water block comes with a precisely machined copper base (sometimes referred to as the cold plate) with a dense micro-fin structure that counts 52 grooves with a spacing of 0.25mm apart. The purest copper available on the market is used which is treated with nickel electroplating and further polished to an absolute mirror finish. The top is CNC machined out of high-quality acrylic glass and the newly added frame features a subtle black brushed aluminum look. The EK-Supremacy EVO RGB comes with a universal mounting mechanism that offers error-preventing, tool-less installation supporting LGA-115x and LGA-20xx sockets out of the box. The mounting kit includes a sturdy steel backplate, springs, all the necessary mounting screws and a small tube of Thermal Grizzly Hydronaut high-performance thermal paste. This product is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 4-pin LED connector is to be aligned with the +12V marking on the RGB header. You can easily remove the LED strip cover which is mounted with two screws to replace the LED strip with some other type LED strip. Technical specifications: - RGB cable length: 30cm - RGB connector classic 4-pin (12+ R G B) CPU socket compatibility: - Intel LGA-1150/1151/1155/1156 - Intel LGA-2011(-3) - Intel LGA-2066