3.8/ 5.0
66% pembeli merasa puas
6 rating • 4 ulasan
5(3)50%
4(1)16.67%
3(0)0%
2(2)33.33%
1(0)0%
Atur jumlah dan catatan
Stok Total: 12
Subtotal
Rp74.600
TIMER DIGITAL RELAY SAKLAR OTOMATIS 220V LCD UTK HIDROPONIK POMPA AIR
Rp74.600
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Up to 8 cycles per day.
Internal battery back up saves your settings when power is disconnected.
This is a great accessory for control of solar or battery powered items. Control the time of DC lights,
fans, water fountain pumps, or most any 12volt DC powered item rated at 16 amps or less.
It is powered by any 12 volt DC source and will control 12 volt DC items.
Features:
DC:12v.
Power consumption : 4.4VA.
current consumption without load : 0.015mA.
Cut out (MM) : Φ64.
Fitting Depths (mm) : 21.
SWITCHING CURRENT AC.
Resistive Load (LVD .IEC) 16A /250V AC.
Inductive load cos . 0.6 8A /250V AC.
incandescent lamp load 1000W.
SWITCHING CURRENT DC : 16A/24V DC.
Shortest switching time : 1 min.
Shortest switching interval: 1 min.
Number of channels \"\" 1.
Number of memory spaces : 17.
Operation accuracy : Type(+-)1 s/day.
Ambient temperature : -10℃-55℃.
Type of connection : Plug in.
ACCORDING TO : EN60730-1.
Installation method:screw, connector connection.
Key Button:
1.clock, timer, day, h+(setting the hours), m+(setting the minutes), manual override, reset.
Tips:
2.Before starting the program, the timer should be charged for at least
5 minutes as the inbuild battery may be of no battery.
3.Before setting the program, press the key button reset, to clear
the memorize data for the new instructions.
4.After the program is made, please insert the timer to the plug.
Then connect the electric appliance to the timer.
5.The on and off can be set eight times each day
Internal battery back up saves your settings when power is disconnected.
This is a great accessory for control of solar or battery powered items. Control the time of DC lights,
fans, water fountain pumps, or most any 12volt DC powered item rated at 16 amps or less.
It is powered by any 12 volt DC source and will control 12 volt DC items.
Features:
DC:12v.
Power consumption : 4.4VA.
current consumption without load : 0.015mA.
Cut out (MM) : Φ64.
Fitting Depths (mm) : 21.
SWITCHING CURRENT AC.
Resistive Load (LVD .IEC) 16A /250V AC.
Inductive load cos . 0.6 8A /250V AC.
incandescent lamp load 1000W.
SWITCHING CURRENT DC : 16A/24V DC.
Shortest switching time : 1 min.
Shortest switching interval: 1 min.
Number of channels \"\" 1.
Number of memory spaces : 17.
Operation accuracy : Type(+-)1 s/day.
Ambient temperature : -10℃-55℃.
Type of connection : Plug in.
ACCORDING TO : EN60730-1.
Installation method:screw, connector connection.
Key Button:
1.clock, timer, day, h+(setting the hours), m+(setting the minutes), manual override, reset.
Tips:
2.Before starting the program, the timer should be charged for at least
5 minutes as the inbuild battery may be of no battery.
3.Before setting the program, press the key button reset, to clear
the memorize data for the new instructions.
4.After the program is made, please insert the timer to the plug.
Then connect the electric appliance to the timer.
5.The on and off can be set eight times each day
Ada masalah dengan produk ini?