Lithium Battery Charging TP4056 5V 1A Micro USB / Modul

Deskripsi Modul TP4056 + Protection

--- Ready stock = Produk bisa langsung dibeli ---

Features:
- TP4056 is a complete single-cell lithium-ion battery with a constant current/constant voltage linear charger
- The SOP40 package with a heat sink on the bottom of the TP4056 and fewer external components make the TP4056 an ideal choice for portable applications
- TP4056 is suitable for USB power supply and adapter power supply
- Due to the internal PMOSFET architecture and anti-reverse charging path, no external isolation diode is required. Under high power operation or high ambient temperature conditions, thermal feedback will automatically adjust the charging current to limit the chip temperature
- The charging voltage is fixed at 4.2V, and the charging current can be set externally through a resistor. When the charging current reaches the final float voltage and drops to 1/10 of the set value, the TP4056 will automatically terminate the charging cycle
- When the input voltage (AC adapter or USB power supply) is removed, the TP4056 automatically enters a low current state, reducing the battery leakage current to less than 2uA
- TP4056 can also be placed in shutdown mode when there is power supply, reducing the power supply current to 55uA

Specifications:
- Micro USB input terminal with a female, can be directly input to do with the phone charger rechargeable lithium battery, And still retains the input voltage wiring pads, can be very convenient DIY
- It can be used for voltage 3.6 3.7V, etc. 18650, polymer and other lithium battery charge and is charge protection
- Input voltage: 5V
- Charging cut-off voltage: 4.2V ± 1%
- Maximum charge current: 1000mA
- Battery over-discharge protection voltage: 2.5V
- Battery overcurrent protection current: 3A
- Board size: 17.16 mm x 26.17 mm

Package includes:
1Pcs x Modul TP4056

Grosir:
- 1 kg = 1150 pcs
- Harga grosir lebih murah
- Reseller, dropshipper, dan beli banyak welcome :)