FESTO proximity switch SIES-8M-PS-24V-K-0,3-M8D Part: 551387

Feature Value Shipping date View Design for T-slot Conforms to standard EN 60947-5-2 Authorisation RCM Mark c UL us - Listed (OL) CE mark (see declaration of conformity) to EU directive for EMC in accordance with EU RoHS directive KC mark KC-EMV Materials note Conforms to RoHS Measured variable Position Measuring principle Inductive Nominal switching distance 1.5 mm Reduction factors Aluminium = 0.62 Stainless steel V2A = 0.95 Copper = 0.6 Brass = 0.72 Steel, St 37 = 1.0 Ambient temperature -25 ... 70 °C Repetition accuracy for constant conditions lt;= 0.05 mm, approach from the side Switch output PNP Switching element function Normally open contact Switch-on time lt;= 0.000 ms Max. switching frequency 4,500 Hz Max. output current 150 mA Max. contact rating DC 4.5 W Voltage drop lt;= 2 V Inductive protective circuit Integrated Minimum load current 0 mA Residual current lt;= 0.01 mA Short circuit strength Pulsing Overload withstand capability Available Operating voltage range DC 10 ... 30 V Residual ripple 10 % Idle current lt;= 10 mA Polarity protected for all electrical connections Electrical connection 1, connection type Cable with plug Electrical connection 1, connection technology M8x1, A-coded to EN 61076-2-104 Electrical connection 1, number of pins/wires 3 Electrical connection 1, type of mounting Screw lock Connector exit direction axial Material electrical contact Brass, gold-plated Test conditions of cable Bending strength according to Festo standard Test conditions on request Chain link trunking: 5 million cycles, bending radius 75 mm Cable length 0.3 m Cable attribute Standard + chain link trunking Cable sheath colour Grey Material cable sheath TPE-U(PU) Material insulation PP Size Slot 8 Mounting type flush with T-slot Tightened Insertable in slot from above Tightening torque 0.6 Nm Assembly position Any Type of installation flush Housing colour Black Material housing Nickel-plated brass PA PUR High alloy steel, n