Focusrite x Audio Technica Premium Package - Focusrite Scarlett 2i2 4th - Gen 4 Audio Interface / AT2020 Microphone / ATH M20X Headphone

Focusrite x Audio Technica Premium Package - Focusrite Scarlett 2i2 4th - Gen 4 / AT2020 Microphone / ATH M20X Headphone


100% PRODUK RESMI
100% PRODUK ORIGINAL
GARANSI RESMI 1 TAHUN


SPECIFICATIONS (2i2 gen 4)
RECORDING
•Supported Sample Rates:
44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
Bit Depth24-bit
MICROPHONE INPUTS
•Frequency Response:
20Hz - 20kHz ± 0.06dB
•Dynamic Range: (A-weighted)116dB
•THD+N:
-100dB (-1dBFS @ 8dB Gain)
•Noise EIN:
(A-Weighted) -127dBu
•Maximum Input Level (at minimum gain): 16dBu
•Gain Range: 69dB
•Input Impedance: 3kΩ
LINE INPUTS
•Frequency Response:
20-20kHz ± 0.05dB
•Dynamic Range:
115.5dB (A-Weighted)
•THD+N: -100dB @ 8dB gain
•Maximum Input Level: 22dBu
•Gain Range: 69dB
•Impedance: 60kΩ
INSTRUMENT INPUTS
•Frequency Response:
20-20kHz ± 0.15dB
•Dynamic Range:
113dB (A-Weighted)
•THD+N: -80dB @ minimum gain
•Maximum Input Level: 12dBu
•Gain Range: 62dB
•Impedance: 1MΩ
LINE OUTPUTS (BALANCED)
•Frequency Response:
20-20kHz ± 0.02dB
•Dynamic Range: 120dB
•THD+N: -109dB
•Maximum Output Level: 16dBu
•Impedance: 100Ω
HEADPHONE OUTPUTS
•Frequency Response:
20-20kHz ± 0.1dB @ 33Ω / 300Ω
•Dynamic Range:
112dB @ 33Ω
115dB @ 300Ω
•THD+N:
-99dB @ 33Ω
-108dB @ 300Ω
•Maximum Output Level:
2.5dBu into 33Ω
10dBu into 300Ω
•Maximum Output Power:
32mW into 33Ω
22mW into 300Ω
•Impedance: 50Ω
ANALOGUE to DIGITAL CONVERTER
•THD+N: -110dB
•Dynamic Range: 120dB
DIGITAL to ANALOGUE CONVERTER
•THD+N: -115dB
•Dynamic Range:
130dB (A-Weighted)
POWER
USB: 900mA
External (Optional): 4.5W


SPECIFICATIONS (AT2020 Microphone)
•ELEMENT Fixed-charge back plate
permanently polarized condenser
•POLAR PATTERN Cardioid
•FREQUENCY RESPONSE 20-20,000 Hz
•OPEN CIRCUIT SENSITIVITY –37 dB (14.1 mV) re 1V at 1 Pa*
•IMPEDANCE 100 ohms
•MAXIMUM INPUT SOUND LEVEL 144 dB SPL, 1 kHz at 1% T.H.D.
•NOISE1 20 dB SPL
•DYNAMIC RANGE (typical) 124 dB, 1 kHz at Max SPL
•SIGNAL-TO-NOISE RATIO1 74 dB, 1 kHz at 1 Pa*
•PHANTOM POWER 48V DC, 2 mA typical
•REQUIREMENTS
•WEIGHT (less accessories) 12.1 oz (345 g)
•DIMENSIONS 6.38" (162.0 mm) long, 2.05" (52.0 mm) maximum body
diameter
•OUTPUT CONNECTOR Integral 3-pin XLRM-type


SPECIFICATION (ATH M20X Headphones)
•Type: Closed-back dynamic
•Driver Diameter: 40 mm
•Frequency Response:
15 - 20,000 Hz
•Maximum Input Power:
700 mW at 1 kHz
•Sensitivity: 96 dB
•Impedance: 47 ohms
•Weight:
190 g (6.7 oz), without cable and connector
•Cable:
3.0 m (9.8'), straight, left-side exit
•Magnet: Neodymium
•Voice Coil:
Copper-clad aluminum wire