Micro Small Motor for DIY Vacuum Cleaner Parts High Speed HenOL

Micro Small Motor for DIY Vacuum Cleaner Parts High Speed HenOL Kami Menyediakan Barang yang Anda Butuhkan - Item tersedia - Buka 24 jam, kec admin lagi ketiduran - Hub Kami Untuk Menanyakan varian Barang - Pengiriman cepat 6-15 hari sampai Origin : CN(Origin) Certification : CE Rated voltage : DC 21.6V Speed : 90000rpm No-load current: about : 7.5A Description Rated voltage: DC 21.6V No-load current: about 7.5A No-load speed: more than 90,000 revolutions (super high speed) Voltage: DC 12V The nominal rated voltage of the motor body is 21.6 volts, the store feels that 18 volts is very violent, the wind is very strong, the actual video only used 12 volts! Because I opened the metal casing to expose the fan blades for shooting, I didn #39;t dare to adjust it to 22 volts. Buyers and friends must also be careful, high-speed motors, and fingers do not touch the high-speed fan blades to prevent accidents. The recommended voltage is 12 to 18 volts, and the suction power is sufficient. For this type of high-power, high-starting current vacuum cleaner motor, the current of the power supply should preferably be above 15A, especially the switching power supply, preferably above 20A, because the switching power supply is protected when it is overloaded. Both of these two models have starting currents. It may exceed 20A. If the current is too small, it may even fail to start. The movement of this vacuum cleaner is more upscale than ever. The motor uses a 545 high-speed brushed motor. There is a cooling fan inside. The carbon brush is an extended version, which is twice as long as ordinary carbon brushes! Life expectancy is also doubled! The use of ball bearings at the front and rear of the motor makes the violent HM30651