5.0/ 5.0
100% pembeli merasa puas
1 rating • 1 ulasan
5(1)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 48
Subtotal
Rp2.200.000
Chockfast Orange PR-610TCF Pourable Chocking Compound 3.4kg / Chock Fast PR 610 TCF 3.4 kg
Rp2.200.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Maintenance
CHOCKFAST ORANGE PR 610 TCF - 3,4KG
Product Description
• CHOCKFAST ORANGE (PR-610TCF) is a specially formulated 100% solids, two component inert filled casting compound developed for use as a chocking or grouting material. CHOCKFAST is designed to withstand severe marine and industrial environments involving a high degree of both physical and thermal shock. The compound is non-shrinking and has very high impact and compressive strength.
• Years of successful in-service experience have shown the use of PR-610TCF to be a far superior yet less expensive method of establishing and permanently retaining precise equipment alignment under extreme conditions.
• PR-610TCF is approved or accepted for its intended marine use by American Bureau of Shipping, Lloyd's Register, Bureau Veritas, Det Norske Veritas, Germanischer Lloyd and most other major regulatory agencies worldwide.
Use & Benefits
• CHOCKFAST ORANGE was developed as a chocking or grouting compound for use under marine main propulsion machinery in depths of ½” to 4” (12mm to 100mm). The compound is used under diesel and gas engines, reduction gears, generators, compressors, pumps, bearing blocks, crane rails and numerous other applications.
• PR-610TCF requires no special tools or special skills as does chocking with steel. When cast, CHOCKFAST ORANGE flows readily into the chock area filling voids and conforming to all irregularities. This eliminates the machining of base plates or foundations for a perfectly fitted chock.
Design Considerations
• For design considerations and application details please request Bulletin No. 692 for Marine and 42 for Industrial applications or contact ITW Philadelphia Resins' Engineering Services Department.
Application Instructions
• Using open-cell foam damming material, build a dam around 3 sides of the area to be chocked. Wrap the anchor bolt with tape so the Chockfast will not stick to it, Install a metal dam along the front of the chock approximately ½” to ¾” (12mm to 18mm) from the mounting flange. Seal the flange with strip caulking, or Silicone to prevent leaks. Install foam in the overpour area to the top of the mounting flange to prevent the Chockfast from leaking.
• Mix the Chockfast as directed on the can. See technical Bulletin #665 to determine the proper amount of hardener to use. Slowly pour the Chockfast into one end of the overpour area and allow it to flow across and under the mounting flange.
Areas of Application
• Under diesel and gas engines
• Reduction gears
• Generators
• Compressors
• Pumps
• Bearing blocks
• Crane rails
What's Included
(1) Pourable Chocking Compound Resin
(1) Pourable Chocking Compound Hardener
*Produk Original CHOCKFAST.
*Harga untuk 1 Set.
*Jumlah yang banyak bisa dikirim dengan kargo, karena ongkos kirim lebih murah.
*Catatan Pengiriman:
Barang ini mengandung cairan/gas dan tidak dapat dikirim melalui udara ke luar Batam. Pengiriman wajib dialihkan melalui jalur darat atau laut, yang mungkin memerlukan waktu lebih lama dari perkiraan. Kami mohon pengertiannya. Terima kasih.
------------------------------------------------------------
Chockfast Orange PR-610TCF @ 3.4kg
https://tokopedia.link/4L9ADvFPmPb
Chockfast Orange PR-610TCF @ 6.8kg
https://tokopedia.link/VaOUASEPmPb
Product Description
• CHOCKFAST ORANGE (PR-610TCF) is a specially formulated 100% solids, two component inert filled casting compound developed for use as a chocking or grouting material. CHOCKFAST is designed to withstand severe marine and industrial environments involving a high degree of both physical and thermal shock. The compound is non-shrinking and has very high impact and compressive strength.
• Years of successful in-service experience have shown the use of PR-610TCF to be a far superior yet less expensive method of establishing and permanently retaining precise equipment alignment under extreme conditions.
• PR-610TCF is approved or accepted for its intended marine use by American Bureau of Shipping, Lloyd's Register, Bureau Veritas, Det Norske Veritas, Germanischer Lloyd and most other major regulatory agencies worldwide.
Use & Benefits
• CHOCKFAST ORANGE was developed as a chocking or grouting compound for use under marine main propulsion machinery in depths of ½” to 4” (12mm to 100mm). The compound is used under diesel and gas engines, reduction gears, generators, compressors, pumps, bearing blocks, crane rails and numerous other applications.
• PR-610TCF requires no special tools or special skills as does chocking with steel. When cast, CHOCKFAST ORANGE flows readily into the chock area filling voids and conforming to all irregularities. This eliminates the machining of base plates or foundations for a perfectly fitted chock.
Design Considerations
• For design considerations and application details please request Bulletin No. 692 for Marine and 42 for Industrial applications or contact ITW Philadelphia Resins' Engineering Services Department.
Application Instructions
• Using open-cell foam damming material, build a dam around 3 sides of the area to be chocked. Wrap the anchor bolt with tape so the Chockfast will not stick to it, Install a metal dam along the front of the chock approximately ½” to ¾” (12mm to 18mm) from the mounting flange. Seal the flange with strip caulking, or Silicone to prevent leaks. Install foam in the overpour area to the top of the mounting flange to prevent the Chockfast from leaking.
• Mix the Chockfast as directed on the can. See technical Bulletin #665 to determine the proper amount of hardener to use. Slowly pour the Chockfast into one end of the overpour area and allow it to flow across and under the mounting flange.
Areas of Application
• Under diesel and gas engines
• Reduction gears
• Generators
• Compressors
• Pumps
• Bearing blocks
• Crane rails
What's Included
(1) Pourable Chocking Compound Resin
(1) Pourable Chocking Compound Hardener
*Produk Original CHOCKFAST.
*Harga untuk 1 Set.
*Jumlah yang banyak bisa dikirim dengan kargo, karena ongkos kirim lebih murah.
*Catatan Pengiriman:
Barang ini mengandung cairan/gas dan tidak dapat dikirim melalui udara ke luar Batam. Pengiriman wajib dialihkan melalui jalur darat atau laut, yang mungkin memerlukan waktu lebih lama dari perkiraan. Kami mohon pengertiannya. Terima kasih.
------------------------------------------------------------
Chockfast Orange PR-610TCF @ 3.4kg
https://tokopedia.link/4L9ADvFPmPb
Chockfast Orange PR-610TCF @ 6.8kg
https://tokopedia.link/VaOUASEPmPb
Ada masalah dengan produk ini?