Relay 1 Channel 5V Kualitas Tinggi | Arduino

Relay 1 Channel 5V Kualitas Tinggi | Arduino Features : - Module adopts high-quality relays with normal interface and maximum load: AC 250V/10A, DC 30V/10A - Using patch optocoupler isolation, strong driving ability, stable performance, trigger current 5mA. - Working voltage of the module is 5V. - Modules can be triggered by setting high or low levels through jumpers. - Fault-tolerant design, even if the control line is broken, the relay will not move. - Power indicator (green), relay status indicator (red). - The interface design is humanized. All interfaces can be directly connected through the terminal, which is very convenient. High and low level trigger selector : - Short connection between jumper and LOW is triggered at low level. - Short connection between jumper and HIGH is triggered by high level Spesifikasi : - DC+: Connect the positive pole of the power supply (voltage according to relay requirements, 5V.12V and 24V options). - DC- : Connect power supply negative pole. - IN : High or Low Level Control Relay Suction. - NO : Relay often opens interface. Relay is suspended before suction and short-connected with COM after suction. - COM : Relay Common Interface - NC : Normally closed interface of relay, short connection with COM before relay suction, suspension after suction Terimakasih sudah datang ke toko kami, dengan senang hati kami akan membantu berbagai kebutuhan anda terkait perangkat teknologi agrikultur, jangan sungkan Chat kami untuk mendapatkan informasi lebih lanjut. - greenLab Admin-