KABEL DATA PROGRAMING FX-USB-AW USB-SC09-FX FOR MITSUBISHI PLC

USB-SC09-FX Mitsubishi FX programming cable is suitable for the full range of PLCLC, can replace FX-232AW communication module, supports maximum communication distance of two kilometers. Features and Specifications: Support USB-SC09-FX operating system: Windows7 / Windows2000 / Windows XP. Support USB-SC09-FX programming software version: FXGP / WIN V1.0, GPP V4.0, GX Developer V7.0 and above Complete speed USB V1.1 and USB CDC V1.1 specification USB bus powered, with current consumption of 50mA Baud Rate: 300bps ~ 1Mbps standard automatic baud rate adaptation Support UART data format: data bits: 7, 8, stop bits: 1, 2, Parity: odd / even / no parity Support long-distance communications, the largest communications distance 2 km (9600bps time) Each PC only supports a USB programming cable Working temperature: -20 ~ +75C Cable length: 2.5m, color: yellow industrial gradeUSB-SC09-FX is a programming cable that provides serial connection and RS422 signal conversion through the USB interface. Under the control of the driver running in the computer, the computer’s USB interface is simulated into a traditional serial port (commonly known as COM port), thereby using the existing Application software such as various programming software, communication software and monitoring software. The working power of this cable is taken from the USB port and is no longer powered by the programming port of the PLC. The two-color light-emitting diode on the conversion box indicates the status of data transmission and reception. The USB-SC09-FX programming cable is suitable for Mitsubishi Driver : https://www.amsamotion.store/2019/12/amsamotion-plc-programmable-cable-driver.html