Expansion Omron type CJ1W-TC101

CJ1W-TC101 Expansion Unit Omron Temperature sensor Platinum resistance thermometer: Pt100, JPt100 Number of loops 4 loops or 2 loops with heater burnout detection *1 Control output and heater burnout alarm output NPN or PNP outputs, both with short-circuit protection *1 External power supply voltage: 24 VDC +10%, -15% Max. switching capacity: 100 mA (per output) Leakage current: 0.3 mA max. Residual voltage: 3 V max. Temperature control method ON/OFF control or PID control with two degrees of freedom (Set with pin 6 on the Unit's DIP switch.) Control operation Forward or reverse operation (Set with pins 4 and 5 on the Unit's DIP switch.) RUN/STOP control Supported (Controlled from the CPU Unit through bits allocated in the Special I/O Unit area.) Operation with CPU Unit in PROGRAM mode The Temperature Control Unit can be set to continue operating or stop operating when the CPU Unit is in PROGRAM mode. (Set with pin 1 on the Unit's DIP switch.) Auto/Manual switch for operational output None Autotuning (AT) of PID constant Supported (Controlled from the CPU U