Atur jumlah dan catatan
Stok Total: Sisa 10
Subtotal
Rp16.681.000
YJCS-5B Ultrasonic Mold polishing machine Mould Polisher Full set with parts
Rp16.681.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
YJCS-5B Professional Ultrasonic Mold Polisher Polishing Machine 220V/110V
YJCS-5B is a bi-function polishing machine. It works much faster than manual polishing; it also can polish deep and narrow areas where manual polishing cannot reach. Its EDM erosion function offers an economical and fast approach to polish extra-hard alloy or carbide.
1. Application: ribs, slits, tapered holes of dies, different shaped holes and other areas that are hard to polish or finish by hand
2. Applicable Material: steel, carbide, glass, precious stones
3. EDM Fluid: kerosene or water
4. Input: single phase 220V or 110V~10% 50/60Hz
5. Output: 60W, 19-28 KHz, 9-stage output selection
6. Dimensions: 230 by 130 by 78mm3
7. Weight: Approx. 3Kg
1. Ultrasonic vibration tracking system
2. Nine step numerical EDM power control
3. Nine step numerical vibrating power control.
4. Able to adjust the EDM gap automatically to obtain maximum output.
5. Fine EDM process, suitable for intricate mould.
7. The hand piece is light and handy, reduce fatigue and promote efficiency.
8. Machine occupies a small work place.
EFFECT OF YJ-5B POLISHING
1. Appearance: after polishing, the surface should be flatly lapped; all EDM, wire-cut or milling marks should be removed.
2. Roughness: After EDM Erosion Stage 1, the surface roughness should be below Ra0.3. After complete ultrasonic finishing, the surface roughness should be around Ra0.012 (mirror finish).
3. Ultrasonic Finishing Speed:
Tip Type
Roughness
Approx. Speed
Ceramic stone tip
Ra2.5-Ra0.5
1cm2/min
Brass rod tip
Ra0.1-Ra0.2
2cm2/min
Hard wood tip
Ra0.3-Ra0.05
1cm2/min
Soft wood tip
Ra0.05-Ra0.012
1cm2/min
The speed may differ due to operator familiarity and working area complexity.
4. EDM Erosion Speed: 2mm3/min.
Please note: polishing paste is not included
Specifications:
Hign-concerned Chemical: None
Origin: Mainland China
Type: Bench Polisher
Brand Name: VENJOYIT
YJCS-5B is a bi-function polishing machine. It works much faster than manual polishing; it also can polish deep and narrow areas where manual polishing cannot reach. Its EDM erosion function offers an economical and fast approach to polish extra-hard alloy or carbide.
1. Application: ribs, slits, tapered holes of dies, different shaped holes and other areas that are hard to polish or finish by hand
2. Applicable Material: steel, carbide, glass, precious stones
3. EDM Fluid: kerosene or water
4. Input: single phase 220V or 110V~10% 50/60Hz
5. Output: 60W, 19-28 KHz, 9-stage output selection
6. Dimensions: 230 by 130 by 78mm3
7. Weight: Approx. 3Kg
1. Ultrasonic vibration tracking system
2. Nine step numerical EDM power control
3. Nine step numerical vibrating power control.
4. Able to adjust the EDM gap automatically to obtain maximum output.
5. Fine EDM process, suitable for intricate mould.
7. The hand piece is light and handy, reduce fatigue and promote efficiency.
8. Machine occupies a small work place.
EFFECT OF YJ-5B POLISHING
1. Appearance: after polishing, the surface should be flatly lapped; all EDM, wire-cut or milling marks should be removed.
2. Roughness: After EDM Erosion Stage 1, the surface roughness should be below Ra0.3. After complete ultrasonic finishing, the surface roughness should be around Ra0.012 (mirror finish).
3. Ultrasonic Finishing Speed:
Tip Type
Roughness
Approx. Speed
Ceramic stone tip
Ra2.5-Ra0.5
1cm2/min
Brass rod tip
Ra0.1-Ra0.2
2cm2/min
Hard wood tip
Ra0.3-Ra0.05
1cm2/min
Soft wood tip
Ra0.05-Ra0.012
1cm2/min
The speed may differ due to operator familiarity and working area complexity.
4. EDM Erosion Speed: 2mm3/min.
Please note: polishing paste is not included
Specifications:
Hign-concerned Chemical: None
Origin: Mainland China
Type: Bench Polisher
Brand Name: VENJOYIT
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan