5.0/ 5.0
100% pembeli merasa puas
1 rating • 1 ulasan
5(1)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 1
Subtotal
Rp77.000
Action Base 2 Gray
Rp77.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Accessories Gundam
Action Base 2 Gray
Perfect for displaying small-scale Gundam model kits, Action Base 2 is designed to hold kits from Bandai's HGUC, FG, HG Gundam 00, HG Gundam Seed, 1/144-scale models, and SD Gundam series. No other display bases from other companies come close to what this amazing display base allows you to do!
Action Base 2 is a plastic injection snap-fit assembly kit that requires very little work to assemble. No cement or paint required! The trapezium bases (two included) come with cool mechanical detailing and panel lines, with one hole per base for placing the stand. The stand can be extended upwards for posing your kit in a much higher position, and the angle of the stand can also be adjusted to lift or lower your kit. The stand can also be used on Action Base 1 to pose two kits on a single base in close combat!
The set comes with two different sizes (6mm and 7mm) of U-shaped holders, two peg-type holders, and one screw-on type holder (four screws and three nuts are included) for attaching the main stand to the crotch of your kit. When using the U-shaped or screw-on holders, double-sided tape should be applied in between the crotch of the kit and the holders to help hold it in place. (The package notes that there may be cases of a kit not able to fit.)
Each Action Base 2 (two trapezium bases combined) can be attached to up to six other Action Base 2s for you to create an amazing display filled with Gundam kits or other robot kits striking cool action poses!
Original Bandai
Perfect for displaying small-scale Gundam model kits, Action Base 2 is designed to hold kits from Bandai's HGUC, FG, HG Gundam 00, HG Gundam Seed, 1/144-scale models, and SD Gundam series. No other display bases from other companies come close to what this amazing display base allows you to do!
Action Base 2 is a plastic injection snap-fit assembly kit that requires very little work to assemble. No cement or paint required! The trapezium bases (two included) come with cool mechanical detailing and panel lines, with one hole per base for placing the stand. The stand can be extended upwards for posing your kit in a much higher position, and the angle of the stand can also be adjusted to lift or lower your kit. The stand can also be used on Action Base 1 to pose two kits on a single base in close combat!
The set comes with two different sizes (6mm and 7mm) of U-shaped holders, two peg-type holders, and one screw-on type holder (four screws and three nuts are included) for attaching the main stand to the crotch of your kit. When using the U-shaped or screw-on holders, double-sided tape should be applied in between the crotch of the kit and the holders to help hold it in place. (The package notes that there may be cases of a kit not able to fit.)
Each Action Base 2 (two trapezium bases combined) can be attached to up to six other Action Base 2s for you to create an amazing display filled with Gundam kits or other robot kits striking cool action poses!
Original Bandai
Ada masalah dengan produk ini?