Pc Desktop Motherboard Memory Slot Ddr5 Udimm/Rdimm Diagnostic Repair

Selamat Datang di Toko Kami. - Kami Menjual Produk-produk Import - Produk Dikirim dari Luar Negeri. - Estimasi Kiriman 5-15 Hari. Mohon Menunggu Package : Yes Type : Data Converters Description DDR5 memory module test indicatorMemory tester introduction: The fault of the computer memory bar is mainly caused by the gold hand too dirty gold finger contact, gold finger wear, PCB breakage, datarejection damage, video memory open and short circuit, poor video memory performance, etc.In view of the above common failures of memory, we developed this memory tester to test various failures caused by open and short circuits of memory hardware. The product uses 248 LED finger lights to test all the data lines of the memory, and when these dataloops produce hardware failures, the brightness of the LED indicator will change, especially bright and not bright.Put the equipped battery (CR2032 3.6V) into the battery holder, insert the memory to be tested into the slot of the memory tester, press the test switch, if all the indicators are on.And the brightness is consistent, indicating that the memory datacircuit has no open short circuit fault,If the indicator light blinks during the test, it indicates that the goldfinger has poor contact. If the indicator light does not say that there is an open circuit fault in the hardware, check the wear of the goldfinger, whether the exhaust resistance is damaged, and whether the PCBis open, follow thenumber of the indicator light, find the fault pin, and then use a multimeter to find out the specific cause of the fault. After the memory hardware test is passed, the poor performance of the video memory should be tested, and the faulty video memory should be found with an alternative method or the corresponding test software. Note: This product does not contain a button battery inside! Silahkan diorder.. :)