Kingston FURY Beast RGB 16GB (8X2) DDR4 3200MHz [RAM] - 16GB (8X2)

SPECIFICATIONS
KF432C16BB2AK2/16
16GB (8GB 1G x 64-Bit x 2 pcs.)
DDR4-3200 CL16 288-Pin DIMM Kit
Continued >>
FEATURES
Kingston FURY KF432C16BB2AK2/16 is a kit of two 1G x 64-bit
(8GB) DDR4-3200 CL16 SDRAM (Synchronous DRAM) 1Rx8,
memory module, based on eight 1G x 8-bit FBGA components per
module. Each module kit supports Intel Extreme Memory Profiles
(Intel XMP) 2.0. Total kit capacity is 16GB. Each module has been
tested to run at DDR4-3200 at a low latency timing of 16-18-18 at
1.35V. The SPDs are programmed to JEDEC standard latency
DDR4-2400 timing of 17-17-17 at 1.2V. Each 288-pin DIMM uses
gold contact fingers. The JEDEC standard electrical and mechanical
specifications are as follows:
CL(IDD)
Row Cycle Time (tRCmin)
Refresh to Active/Refresh
Command Time (tRFCmin)
Row Active Time (tRASmin)
UL Rating
Operating Temperature
Storage Temperature
17 cycles
45.75ns(min.)
350ns(min.)
32ns(min.)
94 V - 0
0o
C to +70o
C
-40o
C to +85o
C
FACTORY TIMING PARAMETERS
• Default (JEDEC): DDR4-2400 CL17-17-17 @ 1.2V
• XMP Profile #1: DDR4-3200 CL16-18-18 @ 1.35V
• XMP Profile #2: DDR4-3000 CL15-17-17 @ 1.35V
• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• On-Die termination (ODT)
• 16 internal banks; 4 groups of 4 banks each
• Bi-Directional Differential Data Strobe
• 8 bit pre-fetch
• Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
• Height 1.69” (43mm), w/heatsink