Level Meter Submersible PTFE P262-B

INATEC - P262-B PTFE Submersible level meter The INATEC anti-corrosion input liquid level transmitter uses a high-performance ceramic pressure sensor as a measuring element to accurately measure the hydrostatic pressure proportional to the liquid level depth, and convert it into a standard current, voltage or RS485 signal output through a signal conditioning circuit , establish a linear correspondence between the output signal and the liquid level depth, and realize the measurement of the liquid depth. The product is made of polytetrafluoroethylene anti-corrosion material, which has excellent corrosion resistance and is widely used in liquid level measurement of acid, alkali and other corrosive media in chemical plants. VARIANT (Submersible level meter) (Anti-corrosion type) 0-5 meters CHARACTERISTICS Pressure type : Gauge pressure Measuring range : 0~1m...200m water column Accuracy : 1%,0.5%(range ≥ 5 meters) PARAMETERS Pressure type : Gauge pressure Measuring range : 0~1m...200m water column Accuracy : 1%,0.5%(range ≥ 5 meters) Output and power supply range : (4~20) mA output (10~32) V, (0~10) V output (12~32) V, RS485 output (8~32) V Compensation temperature : (0~70) ℃ Medium temperature : (-40~125) ℃ Storage temperature : (-40~85)°C Overload pressure : 200%FS Long-term stability : ±0.5%FS/year Response time : Current, voltage output type pressure ≤ 10ms (up to 90% FS) RS485 output type pressure : ≤ 100ms (up to 90% FS) Insulation resistance : 20MΩ/250VDC Ingress protection : IP68 Load resistance : (4~20) mA output: load resistance ≤ (U-10V)/0.02A, U is the supply voltage, Voltage output : load resistance ≥ 5kΩ NOTE Pre-order 2~ 4 week.