DVPEN01-SL New Original PLC Ethernet Communication Module

DVPEN01-SL New Original PLC Ethernet Communication Module 32794376988 Pre-Order +/- Sampai Alamat 10-15 Hari FREE ONGKIR+PAJAK Garansi uang kembali jika Rusak, Beda Produk is_customized : Yes Model Number : DVPEN01-SL Standard or Nonstandard : Standard Structure : Single-side Bracket Usage : Industrial DIY Supplies : ELECTRICAL Material : Metal Origin : Mainland China Certification : NONE Status : New DVPEN01-SL New Original PLC Ethernet Communication Module Introduction DVPEN01-SL is an Ethernet communication module for remote setting and communication through WPLSoft. DVPEN01-SL is able to send E-mails, automatically correct the RTC in DVP28SV11R/T and exchange data. It supports Modbus TCP communication protocol and can conduct remote monitoring by using SCADA (Supervisor Control and Data Acquisition) software or HMI (Human Machine Interfaces). DVPEN01-SL can be the master of Modbus TCP, sending out Modbus TCP instructions and controlling the peripheral equipment. In addition, under MDI/MDI-X auto-detection, it does not need to use a crossing cable. See the contents below for more detailed instructions on DVPEN01-SL module. Specifications Internet interface Interface RJ-45 with Auto MDI/MDIX Number of ports 1 Port Transmission method IEEE802.3, IEEE802.3u Transmission cable Category 5e Transmission speed 10/100 Mbps Auto-Detect Network protocol ICMP, IP, TCP, UDP, DHCP, SMTP, NTP, Modbus TCP Serial communication interface Interface RS-232 Number of ports 1 Port Transmission cable DVPACAB230, DVPACAB215, DVPACAB2A30, DVPACAB2B10 Environment Noise immunity ESD (IEC 61131-2, IEC 61000-4-2): 8KV Air Discharge EFT (IEC 61131-2, IEC 61000-4-4): Power Line: 2KV Analog amp; Communication I/O: 1KV Damped-Osci