Atur jumlah dan catatan
Stok Total: Sisa 10
Subtotal
Rp11.042.000
Textile Density Hardness Tester HT-6510T-5 Kain Kepadatan Kekeras Best
Rp11.042.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Hardware Desember 2024
- Dikirim dari dengan kardus double utk keamanan produk
- Semua produk kami bergaransi
Alat ukur kekerasan/ kepadatan Tekstil dirancang khusus untuk melakukan pengukuran kekerasan tekstil berdasarkan pengukuran kekuatan resistansi penetrasi bola terhadap spool di bawah beban pegas
====
To measure the winding density (hardness) of textile bobbins, beams, spools, cones, dye packages etc.
* Convertible probe, the curved end of the probe is used for the bobbin with a diameter less than or equal to 400mm, and the flat end of the probe is suitable for the bobbin with a diameter greater than 400mm.
* With average calculate function.
* Peak value deposit function.
* Under-voltage alarm function.
* Use USB data output to connect with PC.
* Provide Bluetooth data output choice.
The principle used to measure textile hardness is based on measuring the resistance force of the penetration of a ball against the spool under a known spring load. The measuring principle is the same as for the Shore A hardness test.
Model：HT-6510T-5
Parameters：Tested Result/Mean Value/Max.Value
Indenter：Ball 5mmΦ
Convertible Probe：The curved end of the probe is used for the bobbin with a diameter less than or equal to 400mm, and the plane end of the probe is suitable for the bobbin with a diameter greater than 400mm
Area Of Application：For loosely wound bobbins of synthetic fibers and closely wound natural fibers, yarns and threads
Display Range：0-100H (hardness graduation marks)
Testing Range：10-90H (hardness graduation marks)
Resolution：0.1H
Accuracy：≤±1H
Battery Indicator：Low Battery Indicator
Auto Switch Off：√
Depth Of Indentation*：0-2.5mm
Test Pressure**：Approx. 12.5N
Measuring Spring Force*：0.55- N
Scale Diameter：51mm
Working Face Radius：55mm (when using the curved end of the probe)
Working Face Flat：45mmΦ (when using the plane end of the probe)
;80%RH
Power Supply：2x1.5V AAA(UM-4)Battery(Not including batteries)
Dimensions：177x65x45mm
Weight：Approx. 285g
Jangan lupa tanyakan stok terlebih dahulu sebelum order ya
Kami pastikan barang yang kami kirim sesuai foto dan deskripsi iklan.
Untuk Info Lebih Lanjut bisa tanyakan lewat fitur Chat tokopedia,
Transaksi yang masuk hari Minggu dan Hari Libur Nasional akan kami proses keesokan harinya,
Selamat berbelanja di toko kami.
- Semua produk kami bergaransi
Alat ukur kekerasan/ kepadatan Tekstil dirancang khusus untuk melakukan pengukuran kekerasan tekstil berdasarkan pengukuran kekuatan resistansi penetrasi bola terhadap spool di bawah beban pegas
====
To measure the winding density (hardness) of textile bobbins, beams, spools, cones, dye packages etc.
* Convertible probe, the curved end of the probe is used for the bobbin with a diameter less than or equal to 400mm, and the flat end of the probe is suitable for the bobbin with a diameter greater than 400mm.
* With average calculate function.
* Peak value deposit function.
* Under-voltage alarm function.
* Use USB data output to connect with PC.
* Provide Bluetooth data output choice.
The principle used to measure textile hardness is based on measuring the resistance force of the penetration of a ball against the spool under a known spring load. The measuring principle is the same as for the Shore A hardness test.
Model：HT-6510T-5
Parameters：Tested Result/Mean Value/Max.Value
Indenter：Ball 5mmΦ
Convertible Probe：The curved end of the probe is used for the bobbin with a diameter less than or equal to 400mm, and the plane end of the probe is suitable for the bobbin with a diameter greater than 400mm
Area Of Application：For loosely wound bobbins of synthetic fibers and closely wound natural fibers, yarns and threads
Display Range：0-100H (hardness graduation marks)
Testing Range：10-90H (hardness graduation marks)
Resolution：0.1H
Accuracy：≤±1H
Battery Indicator：Low Battery Indicator
Auto Switch Off：√
Depth Of Indentation*：0-2.5mm
Test Pressure**：Approx. 12.5N
Measuring Spring Force*：0.55- N
Scale Diameter：51mm
Working Face Radius：55mm (when using the curved end of the probe)
Working Face Flat：45mmΦ (when using the plane end of the probe)
;80%RH
Power Supply：2x1.5V AAA(UM-4)Battery(Not including batteries)
Dimensions：177x65x45mm
Weight：Approx. 285g
Jangan lupa tanyakan stok terlebih dahulu sebelum order ya
Kami pastikan barang yang kami kirim sesuai foto dan deskripsi iklan.
Untuk Info Lebih Lanjut bisa tanyakan lewat fitur Chat tokopedia,
Transaksi yang masuk hari Minggu dan Hari Libur Nasional akan kami proses keesokan harinya,
Selamat berbelanja di toko kami.
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan