UPS Riello SDL 10000

Description : Models SDL 10000 Power 10000 Va/9000 Watts INPUT Nominal voltage 220-230-240 Vac Minimum voltage 184 Vac Nominal frequency 50/60 Hz ±5Hz Power factor 0,98 Current distortion ≤7% BYPASS Voltage tolerance 180 - 264 Vac (selectable in Economy Mode or Smart Active Mode) Frequency tolerance Selected frequency ±5% (selectable by user) Overload Times 125% for 4 seconds, 150% for 0,5 seconds OUTPUT Nominal voltage 220-230-240 Vac selectable Voltage distortion 3% with linear load / 6% with non-linear load Frequency 50/60 Hz selectable Static variation 1,5% Dynamic variation ≤ 5% in 20 ms Waveform Sinusoidal Crest factor 3 : 1 BATTERIES Type VRLA AGM maintenance-free lead based Recharge time 4-6 hours OTHER FEATURES Net weight (kg) 95 Gross weight (kg) 103 Dimensions (WxDxH) (mm) 2 x (175 x 660 x 455) tower 2 x (19” x 660 x 4U) rack Packaged dimensions (WxDxH) (mm) 780 x 555 x (270+15) Efficiency Line-interactive/Smart Active 98% Protections Overcurrent - short-circuit - overvoltage - undervoltage - temperature - excessive low battery Communications USB / RS232 + slot for communications interface Input plugs Terminal block Output sockets Terminal board + 2 IEC 320 C13 Standards EN 62040-1 EMC EN 62040-2 Directives 73/23 - 93/68 - 2004/108 EC EN 62040-3 Operating temperature 0 °C / +40 °C Relative humidity 95% non-condensing Colour Dark grey RAL 7016 Noise level at 1 m (ECO Mode) 45 dBA Standard equipment provided 2 cable guides; cable tips; software; serial cable; keys for releasing display panel; handles kit