DFRobot : Waterproof DS18B20 Digital temperature sensor Kit

SKU: KB3001 Code: KIT0021 100% Original DFRobot INTRODUCTION This waterproof temperature sensor kit use DS18B20 probe AS . It contains a probe with a resistor module. So it is easy to connect on the Arduino board. The DS18B20 temperature sensor provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface so that only one wire (and ground) needs to be connected from a central microprocessor. Compatible with 3.0-5.5V systems. Check 27 Pcs Sensor Kit for Arduino to get more sensors for Arduino. SPECIFICATION Operating voltage: 3.0~ 5.5V ±0.5°C Accuracy from -10°C to +85°C Usable temperature range: -55 to 125°C (-67°F to +257°F) 9 to 12 bit selectable resolution Uses 1-Wire interface- requires only one digital pin for communication Unique 64 bit ID burned into chip Multiple sensors can share one pin Temperature-limit alarm system Query time is less than 750ms 3 wires interface: Type A Red wire - VCC Black wire - GND Yellow wire - DATA Type B Red wire - VCC Yellow wire - GND Green wire - DATA Stainless steel tube 6mm diameter by 35mm(1.34 #34;) long Cable diameter: 4mm(0.16 #34;) Length: 90cm(35.43 #34; SHIPPING LIST Waterproof DS18B20 Digital temperature sensor (DFR0198) x1 Terminal sensor adapter (DFR0055) x1 Digital sensor cable (FIT0011) Wiki: https://dfrobot.com/wiki/index.php?title=Waterproof_DS18B20_Digital_Temperature_Sensor_(SKU:DFR0198)