4.9/ 5.0
98% pembeli merasa puas
61 rating • 11 ulasan
5(58)95.08%
4(2)3.28%
3(1)1.64%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok: Habis
Subtotal
-
Modul Relay 4 Channel Relay Module 4CH
Rp25.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Modul - Modul
Sebelum Order Tanya stok dulu via diskusi atau cek stok di web resmi jogjarobotika ( buka web jogjarobotika com search nama produk)
Toko kami sudah berpengalaman sejak 2011 di bidang penjualan sparepart online/offline.
Pengiriman komponen anda aman dengan packing dus dan bubble pack.
+==================================================================+
Detail : Cek Gambar
Harga adalah untuk 1pcs
+==================================================================+
Modul Relay 4 Chanel dengan Optocopler
5V 4-Channel Relay interface board, and each one needs 15-20mA Driver Current
Equiped with high-current relay, AC250V 10A ; DC30V 10A
Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
Indication LED'''s for Relay output status
Ideal for single chip microcomputer, household appliance control, etc
Control DC / AC signal, can control 220V AC load
One normally closed contact and one normally open contact
Triode drive, increasing relay coil
High impedance controller pin
Pull-down circuit for avoidance of malfunction
Power supply indicator lamp
Control indicator lamp
Channel: 4 channel
TTL Control Signal: 5V-12V
Hole Diameter: Approx. 3mm
Size (L x W x H): Approx. 75 mm x 50mm x 16.7mm
MERK RELAY TIDAK SELALU SAMA
MERK RELAY TIDAK SELALU SAMA
MERK RELAY TIDAK SELALU SAMA
Toko kami sudah berpengalaman sejak 2011 di bidang penjualan sparepart online/offline.
Pengiriman komponen anda aman dengan packing dus dan bubble pack.
+==================================================================+
Detail : Cek Gambar
Harga adalah untuk 1pcs
+==================================================================+
Modul Relay 4 Chanel dengan Optocopler
5V 4-Channel Relay interface board, and each one needs 15-20mA Driver Current
Equiped with high-current relay, AC250V 10A ; DC30V 10A
Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
Indication LED'''s for Relay output status
Ideal for single chip microcomputer, household appliance control, etc
Control DC / AC signal, can control 220V AC load
One normally closed contact and one normally open contact
Triode drive, increasing relay coil
High impedance controller pin
Pull-down circuit for avoidance of malfunction
Power supply indicator lamp
Control indicator lamp
Channel: 4 channel
TTL Control Signal: 5V-12V
Hole Diameter: Approx. 3mm
Size (L x W x H): Approx. 75 mm x 50mm x 16.7mm
MERK RELAY TIDAK SELALU SAMA
MERK RELAY TIDAK SELALU SAMA
MERK RELAY TIDAK SELALU SAMA
Ada masalah dengan produk ini?