Tenperatur control hanyoung nux AX9-1A Best

AX series
- Multi Input/Output
- High speed sampling cycle (0.1 sec)
- Installation depth 63mm
- Control output selectable Reverse operation/Direct operation
- PID auto tuning

Input type Multi input (Thermocouple K, J, R, T, IEC 584-1), (RTD Pt100 Ω, IEC751)
Sampling cycle 100 ms
Input impedance max 1 ㏁
Albwable input wiring resistance 10 V DC

Display accuracy
- Thermocouple K,J,T ± 0.3 % of F.S ±1 digit (RJC error ±0.8%) ℃
- Thermocouple R ±1.0% of F.S ±1 digit in the 0 ~ 600 ℃ range
±0.3 % F.S ±1 digit in the 600 ~ 1700 ℃ range
- PT100 ±0.3 % of F.S ±1 digit℃

Display type 7 Segment LED (PV red, SV green)

Font size
PV 22.5 X 11.2
SV 18.7 X 9.3

Input resolving power
• Thermocouple 0.1℃ (K2, J, T), 0.5℃ (K1), 0.3℃ / 1℉ (R)
• RTD 0.03℃, (0.1 ℉)

Insulation resistance min 20㏁, 500 V DC 1 minute (primary terminal - secondary terminal)
Dielectric strength V AC, 50/60 ㎐, for 1min (primary terminal - secondary terminal)
Control method PID control by Auto-tuning, ON/OFF control
Manual reset Users set with in the range 0.0% - 100.0%
Control output operation Reverse operation / Direct operation selectable by the parameter setting

Control Output
• Relay output ※Selectable by the prameter setting 1a ,
3 A 240 V AC, 3 A 30 V DC(resistive load)
• Voltage pluse output for running SSR [time sharing proportional control (CYC)]
• Voltage plus output for running SSR [phase control(PHR)] 0/12 V DC, pulse voltage (resistive load minimum 600Ω)
• 4 - 20 ㎃ DC(resistive load max. 600Ω)

Power supply voltage 100 - 240 V AC 50 / 60 ㎐
Voltage fluctuation ±10 % of the power supply voltage
Power consumption 5.5 VA max
Ambient temperature -5 ~ 50℃
Ambient humidity 35 ~ 85% RH (without condensation)
Vibration resistance 10 -55 ㎐, 0.75 mm, each to direction, X, Y and Z for 2 hours
Shock resistance 300 ㎨ to direction 6 each 3 times