Digital Fiber Sensor Optic Amplifier FS-N11N KEYENCE

Product Attributes Manufacturer : Keyence Product No. :  FS-N11N Product Type : Fibre Amplifier Type : Standard 1 output Cable NPN Output : NPN Main Unit/Expansion Unit :  Main unit Control Output  : 1 NPN open collector 24 V; 1 output max: 100 mA or less; 2 output total: 100 mA or less (used stand-alone)/20 mA or less (multiple connections); residual voltage 1 V or less Response Time : 50 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA) Multiple Connections to Expansion Units : Up to 16 units can be connected total (two output type is treated as two units). Light Source LED : Red, 4-element LED APC : ON/OFF Switchable (Factory setting: OFF) Number of Interference Prevention Units : 0 for HIGH SPEED ; 4 for FINE ; 8 for TURBO/SUPER/ULTRA/MEGA (When set to double, the number of interference-prevention units will be doubled.) Power Voltage : 12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less Current Consumption : Normal: 900 mW or less (36 mA max. at 24 V, 48 mA max. at 12 V)*1 Ambient Light : Incandescent Lamp: 20,000 lux or less, Sunlight: 30,000 lux or less Ambient Temperature : -20 to +55 °C -4 to +131 °F (No freezing)*2 Relative Humidity : 35 to 85 % RH (No condensation) Vibration Resistance : 10 to 55 Hz, Double amplitude 1.5 mm 0.06 #34;, 2 hours in each of the X, Y, and Z directions Shock Resistance : 500 m/s2, 3 times in each of the X, Y, and Z directions Case material : Both main unit and expansion unit housing material: Polycarbonate Weight : 0.075 Kg