4.9/ 5.0
100% pembeli merasa puas
28 rating β’ 6 ulasan
5(25)89.29%
4(3)10.71%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 4
Subtotal
Rp1.479.000
DFRobot : Analog Electrical Conductivity Sensor /Meter V2 (K=1)
Rp1.479.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: 04 - DFROBOT OFFICIAL
ππππ: πππππ ππππππππ πππππ ππππ ππππππππ ππ ππππ ππππππ πππππππππ
SKU: KB2001
CODE: DFR0300
FEATURES
3.0~5.0V wide voltage input
Hardware filtered output signal, low jitter
AC excitation source, effectively reduce polarization
Gravity connector and BNC connector, plug and play, no welding
Software library supports two-point calibration, and automatically identifies standard buffer solution, integrates temperature compensation algorithm
Uniform size and connector, convenient for the design of mechanical structures
APPLICATIONS
Water quality monitoring.
Aquaculture.
Hydroponic & Aquaponic.
SPECIFICATION
Signal Conversion Board (Transmitter) V2
Supply Voltage: 3.0~5.0V
Output Voltage: 0~3.4V
Probe Connector: BNC
Signal Connector: PH2.0-3Pin
Measurement Accuracy: Β±5% F.S.
Board size: 42mm*32mm/1.65in*1.26in
Electrical Conductivity Probe
Probe Type: Laboratory Grade
Cell Constant: 1.0
Support Detection Range: 0~20ms/cm
Recommended Detection Range: 1~15ms/cm
Temperature Range: 0~40Β°C
Probe Life: >0.5 year (depending on frequency of use)
Cable Length: 100cm
SHIPPING LIST
Electrical Conductivity ProbeοΌK=1,Laboratory GradeοΌ x1
Signal Conversion Board (Transmitter) V2 x1
Standard Buffer Solution 1413us/cm x2
Standard Buffer Solution 12.88ms/cm x2
Gravity Analog Sensor Cable x1
Waterproof Gasket x2
Screw Cap for BNC Connector x1
M3 * 10 nylon pillar x4
M3 * 5 screw x8
https://www.dfrobot.com/wiki/index.php/Gravity:_Analog_Electrical_Conductivity_Sensor_/_Meter_V2_(K%3D1)_SKU:DFR0300
SKU: KB2001
CODE: DFR0300
FEATURES
3.0~5.0V wide voltage input
Hardware filtered output signal, low jitter
AC excitation source, effectively reduce polarization
Gravity connector and BNC connector, plug and play, no welding
Software library supports two-point calibration, and automatically identifies standard buffer solution, integrates temperature compensation algorithm
Uniform size and connector, convenient for the design of mechanical structures
APPLICATIONS
Water quality monitoring.
Aquaculture.
Hydroponic & Aquaponic.
SPECIFICATION
Signal Conversion Board (Transmitter) V2
Supply Voltage: 3.0~5.0V
Output Voltage: 0~3.4V
Probe Connector: BNC
Signal Connector: PH2.0-3Pin
Measurement Accuracy: Β±5% F.S.
Board size: 42mm*32mm/1.65in*1.26in
Electrical Conductivity Probe
Probe Type: Laboratory Grade
Cell Constant: 1.0
Support Detection Range: 0~20ms/cm
Recommended Detection Range: 1~15ms/cm
Temperature Range: 0~40Β°C
Probe Life: >0.5 year (depending on frequency of use)
Cable Length: 100cm
SHIPPING LIST
Electrical Conductivity ProbeοΌK=1,Laboratory GradeοΌ x1
Signal Conversion Board (Transmitter) V2 x1
Standard Buffer Solution 1413us/cm x2
Standard Buffer Solution 12.88ms/cm x2
Gravity Analog Sensor Cable x1
Waterproof Gasket x2
Screw Cap for BNC Connector x1
M3 * 10 nylon pillar x4
M3 * 5 screw x8
https://www.dfrobot.com/wiki/index.php/Gravity:_Analog_Electrical_Conductivity_Sensor_/_Meter_V2_(K%3D1)_SKU:DFR0300
Ada masalah dengan produk ini?