DFROBOT Gravity BLE Sensor Beacon Bluetooth Module

𝐍𝐎𝐓𝐄: 𝐓𝐈𝐃𝐀𝐊 𝐌𝐄𝐍𝐄𝐑𝐈𝐌𝐀 𝐊𝐋𝐀𝐈𝐌 𝐀𝐓𝐀𝐔 𝐊𝐎𝐌𝐏𝐋𝐀𝐈𝐍 𝐃𝐈 𝐋𝐔𝐀𝐑 𝐒𝐈𝐒𝐓𝐄𝐌 𝐓𝐎𝐊𝐎𝐏𝐄𝐃𝐈𝐀

SKU: KL5034

INTRODUCTION
Note: Gravity: BLE sensor beacons need to be configured using the 3.3V USB-TTL tool.

This Gravity wireless BLE Sensor Beacon with built-in 11-bit ADC is capable of collecting data from digital and analog sensors and broadcasting via Bluetooth. And users can access the sensor data within broadcasting range on a Bluetooth-equipped device like a smartphone, ESP32, etc.

Integrated with low-power BLE 5.3 technology, the BLE sensor beacon supports both LE and private-protocol broadcasting, and its data format works well with iBeacon, Eddystone, and other mainstream protocols. Besides, users can configure data format, broadcast content, and time intervals on a graphical interface as per their needs.

After configuration, it will run as a Bluetooth beacon when powered on, and collect and broadcast data automatically according to the settings. These sensor beacons can be used IoT sensor nodes for data collection in many scenarios such as smart farms, offices, factories, and warehouses


FEATURES
Bluetooth Low Energy 5.3 Compliant
APPLICATIONS
IoT Application
Smart farms
Smart offices
Smart factories
Smart warehouses
SPECIFICATION
Operating Voltage: 3.3-5.5V DC
Operating Current: ＜2mA @Eddystone TLM
Supported sensors: 3.3V digital/analog sensors
Input Signal: digital/analog signals
Operating Frequency Range: 2.4GHz ISM
Modulation: GFSK
Transmitting Power: +5.0dBm
PCB Size: 27mm×33.5mm/1.06×1.32inch
Mounting Hole Size: inner diameter of 3.1mm/outer diameter of 6mm

Wiki - https://wiki.dfrobot.com/SKU_TEL0149_Gravity_BLE_Sensor_Beacon


SHIPPING LIST
Gravity: BLE Sensor Beacon ×1
4Pin Connector ×1