4.0/ 5.0
100% pembeli merasa puas
1 rating โข 0 ulasan
5(0)0%
4(1)100%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 3
Subtotal
Rp125.000
Dfrobot Gravity Flexible Piezo Film Vibration Deteksi Getaran Benturan Sentuhan Sensor
Rp125.000
๐๐๐๐: ๐๐๐๐๐ ๐๐๐๐๐๐๐๐ ๐๐๐๐๐ ๐๐๐๐ ๐๐๐๐๐๐๐๐ ๐๐ ๐๐๐๐ ๐๐๐๐๐๐ ๐๐๐๐๐๐๐๐๐
SKU: KM2030/SEN0209
Introduction
This is an Arduino compatible piezo film vibration sensor. It is made up of flexible piezo film and converter board. The sensor is able to detect vibration, flexibility, impact and touch.
The film is a flexible component comprising a 28 ยตm thick piezoelectric PVDF polymer film with screen-printed Ag-ink electrodes, laminated to a 0.125 mm polyester substrate, and fitted with two crimped contacts. As the piezo film is displaced from the mechanical neutral axis and bending creates very high strain within the piezo polymer, high voltages (about ยฑ90V) are generated. When the assembly is deflected by direct contact, the device acts as a flexible "switch", and the generated output is sufficient to trigger MOSFET or CMOS stages directly.
The module uses universal Gravity 3Pin interface that is easy to plug and play. It comes with Digital and Analog two output signals, which is suitable for all kinds of different applications. The piezo vibration sensor is not only able to detect strong shocks, but also to detect slight vibrations. There is an on-board sensitivity adjustment potentiometer, you can adjust it to increase/decrease the output threshold value.
Meanwhile, the piezo film sensor has a wide dynamic range (0.001Hz~1000MHz) also guarantees an excellent measuring performance.
Specification
Operating Voltage: 5V
Interface Type: Gravity PH2.0 3Pin interface
Operating Temperature: 0 ยฐ C to 85 ยฐ C
Storage Temperature: -40 ยฐ C to 85 ยฐ C
Dimension: 27mm * 22mm
Weight: 10 g
Wiki: https://www.dfrobot.com/wiki/index.php/Gravity:_Flexible_Piezo_Film_Vibration_Sensor_SKU:_SEN0209
Shipping List
Piezoelectric Film x1
Sensor Converter Board x1
Gravity 3-pin Digital Cable x1
SKU: KM2030/SEN0209
Introduction
This is an Arduino compatible piezo film vibration sensor. It is made up of flexible piezo film and converter board. The sensor is able to detect vibration, flexibility, impact and touch.
The film is a flexible component comprising a 28 ยตm thick piezoelectric PVDF polymer film with screen-printed Ag-ink electrodes, laminated to a 0.125 mm polyester substrate, and fitted with two crimped contacts. As the piezo film is displaced from the mechanical neutral axis and bending creates very high strain within the piezo polymer, high voltages (about ยฑ90V) are generated. When the assembly is deflected by direct contact, the device acts as a flexible "switch", and the generated output is sufficient to trigger MOSFET or CMOS stages directly.
The module uses universal Gravity 3Pin interface that is easy to plug and play. It comes with Digital and Analog two output signals, which is suitable for all kinds of different applications. The piezo vibration sensor is not only able to detect strong shocks, but also to detect slight vibrations. There is an on-board sensitivity adjustment potentiometer, you can adjust it to increase/decrease the output threshold value.
Meanwhile, the piezo film sensor has a wide dynamic range (0.001Hz~1000MHz) also guarantees an excellent measuring performance.
Specification
Operating Voltage: 5V
Interface Type: Gravity PH2.0 3Pin interface
Operating Temperature: 0 ยฐ C to 85 ยฐ C
Storage Temperature: -40 ยฐ C to 85 ยฐ C
Dimension: 27mm * 22mm
Weight: 10 g
Wiki: https://www.dfrobot.com/wiki/index.php/Gravity:_Flexible_Piezo_Film_Vibration_Sensor_SKU:_SEN0209
Shipping List
Piezoelectric Film x1
Sensor Converter Board x1
Gravity 3-pin Digital Cable x1
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan