5.0/ 5.0
100% pembeli merasa puas
96 rating ā¢ 18 ulasan
5(94)97.92%
4(2)2.08%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 17
Subtotal
Rp199.000
DFRobot : Waterproof DS18B20 Digital temperature sensor Kit
Rp199.000
šššš: ššššš šššššššš ššššš šššš šššššššš šš šššš šššššš ššššššššš
SKU: KB3001
Code: KIT0021
100% Original DFRobot
INTRODUCTION
This waterproof temperature sensor kit use DS18B20 probe AS . It contains a probe with a resistor module. So it is easy to connect on the Arduino board.
The DS18B20 temperature sensor provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface so that only one wire (and ground) needs to be connected from a central microprocessor. Compatible with 3.0-5.5V systems.
Check 27 Pcs Sensor Kit for Arduino to get more sensors for Arduino.
SPECIFICATION
Operating voltage: 3.0~ 5.5V
Ā±0.5Ā°C Accuracy from -10Ā°C to +85Ā°C
Usable temperature range: -55 to 125Ā°C (-67Ā°F to +257Ā°F)
9 to 12 bit selectable resolution
Uses 1-Wire interface- requires only one digital pin for communication
Unique 64 bit ID burned into chip
Multiple sensors can share one pin
Temperature-limit alarm system
Query time is less than 750ms
3 wires interface:
Type A
Red wire - VCC
Black wire - GND
Yellow wire - DATA
Type B
Red wire - VCC
Yellow wire - GND
Green wire - DATA
Stainless steel tube 6mm diameter by 35mm(1.34") long
Cable diameter: 4mm(0.16")
Length: 90cm(35.43"
SHIPPING LIST
Waterproof DS18B20 Digital temperature sensor (DFR0198) x1
Terminal sensor adapter (DFR0055) x1
Digital sensor cable (FIT0011)
Wiki: wiki(DOT)dfrobot(DOT)com/Waterproof_DS18B20_Digital_Temperature_Sensor__SKU_DFR0198_
SKU: KB3001
Code: KIT0021
100% Original DFRobot
INTRODUCTION
This waterproof temperature sensor kit use DS18B20 probe AS . It contains a probe with a resistor module. So it is easy to connect on the Arduino board.
The DS18B20 temperature sensor provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface so that only one wire (and ground) needs to be connected from a central microprocessor. Compatible with 3.0-5.5V systems.
Check 27 Pcs Sensor Kit for Arduino to get more sensors for Arduino.
SPECIFICATION
Operating voltage: 3.0~ 5.5V
Ā±0.5Ā°C Accuracy from -10Ā°C to +85Ā°C
Usable temperature range: -55 to 125Ā°C (-67Ā°F to +257Ā°F)
9 to 12 bit selectable resolution
Uses 1-Wire interface- requires only one digital pin for communication
Unique 64 bit ID burned into chip
Multiple sensors can share one pin
Temperature-limit alarm system
Query time is less than 750ms
3 wires interface:
Type A
Red wire - VCC
Black wire - GND
Yellow wire - DATA
Type B
Red wire - VCC
Yellow wire - GND
Green wire - DATA
Stainless steel tube 6mm diameter by 35mm(1.34") long
Cable diameter: 4mm(0.16")
Length: 90cm(35.43"
SHIPPING LIST
Waterproof DS18B20 Digital temperature sensor (DFR0198) x1
Terminal sensor adapter (DFR0055) x1
Digital sensor cable (FIT0011)
Wiki: wiki(DOT)dfrobot(DOT)com/Waterproof_DS18B20_Digital_Temperature_Sensor__SKU_DFR0198_
Ada masalah dengan produk ini?