Arduino 4 Relays Shield A000110 - Relay 4ch Original Made In Italy

𝐍𝐎𝐓𝐄: 𝐓𝐈𝐃𝐀𝐊 𝐌𝐄𝐍𝐄𝐑𝐈𝐌𝐀 𝐊𝐋𝐀𝐈𝐌 𝐀𝐓𝐀𝐔 𝐊𝐎𝐌𝐏𝐋𝐀𝐈𝐍 𝐃𝐈 𝐋𝐔𝐀𝐑 𝐒𝐈𝐒𝐓𝐄𝐌 𝐓𝐎𝐊𝐎𝐏𝐄𝐃𝐈𝐀

SKU: KL1018
Code: A000110

Overview
The Arduino 4 Relays Shield is a solution for driving high power loads that cannot be controlled by Arduino's digital IOs, due to the current and voltage limits of the controller. The Shield features four relays, each relay provides 2 pole changeover contacts (NO and NC); in order to increase the current limit of each output the 2 changeover contacts have been put in parallel. Four LEDs indicate the on/off state of each relay.

Features
THINKER KIT INTERFACE 2x TWI, 2x OUT, 2x IN
INTERFACES WITH ARDUINO BOARD DIO
RELAYS 4 (60W)


General
OPERATING VOLTAGE 5 V
CURRENT NEEDS 140 mA (with all releays on, about 35 mA each)
PCB SIZE 53 x 68.5 mm
WEIGHT 0.044 Kg
PRODUCT CODE A000110

Description
Operating Voltage - 5V
Coil current consumption - 140 mA (with all releays on, about 35 mA each)
Single pole chargeover contact maximum current - @ 30 V DC 2A
Maximum load voltage - 48 V
Maximum switching capacity - 60 W

Power
The shield doesn't need external power: it will be provided by the base board, through the 5V and 3.3V pins of the Arduino board used as base.