Arduino Portenta H7 ABX00042 - Original Made In Italy

𝐍𝐎𝐓𝐄: 𝐓𝐈𝐃𝐀𝐊 𝐌𝐄𝐍𝐄𝐑𝐈𝐌𝐀 𝐊𝐋𝐀𝐈𝐌 𝐀𝐓𝐀𝐔 𝐊𝐎𝐌𝐏𝐋𝐀𝐈𝐍 𝐃𝐈 𝐋𝐔𝐀𝐑 𝐒𝐈𝐒𝐓𝐄𝐌 𝐓𝐎𝐊𝐎𝐏𝐄𝐃𝐈𝐀


Code : ABX00042
SKU : KL1015


Use Portenta when performance is key, among other cases, we envision it to be part of:

High-end industrial machinery
Laboratory equipment
Computer vision
PLCs
Industry-ready user interfaces
Robotics controller
Mission-critical devices
Dedicated stationary computer
High-speed booting computation (ms)

Multiple options in one board
Order the default Arduino Portenta H7 (codename H7-15EUNWAD) that comes with:
STM32H747 dual-core processor with graphics engine
8MB SDRAM
16MB NOR Flash
10/100 Ethernet Phy
USB HS
NXP SE050C2 Crypto
WiFi/BT Module
External Antenna
DisplayPort over USB-C

Tech specs
The Arduino Portenta H7 is based on the STM32H747 microcontroller, XI series.

MICROCONTROLLER STM32H747XI dual Cortex-M7+M4 32bit low power Arm MCU (datasheet)
RADIO MODULE Murata 1DX dual WiFi 802.11b/g/n 65 Mbps and Bluetooth (BLE 5 via Cordio stack, BLE 4.2 via Arduino Stack) (datasheet)
SECURE ELEMENT (DEFAULT) NXP SE0502 (datasheet)
BOARD POWER SUPPLY (USB/VIN) 5V
SUPPORTED BATTERY Li-Po Single Cell, 3.7V, 700mAh Minimum (integrated charger)
CIRCUIT OPERATING VOLTAGE 3.3V
DISPLAY CONNECTOR MIPI DSI host & MIPI D-PHY to interface with low-pin count large display
GPU Chrom-ART graphical hardware Accelerator
TIMERS 22x timers and watchdogs
UART 4x ports (2 with flow control)
ETHERNET PHY 10 / 100 Mbps (through expansion port only)
SD CARD Interface for SD Card connector (through expansion port only)
OPERATIONAL TEMPERATURE -40 °C to +85 °C
MKR HEADERS Use any of the existing industrial MKR shields on it
HIGH-DENSITY CONNECTORS Two 80 pin connectors will expose all of the board's peripherals to other devices
CAMERA INTERFACE 8-bit, up to 80 MHz
ADC 3× ADCs with 16-bit max. resolution (up to 36 channels, up to 3.6 MSPS)
DAC 2× 12-bit DAC (1 MHz)
USB-C Host / Device, DisplayPort out, High / Full Speed, Power delivery